- New
- Sale
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality
- Flow
- Modbus | Wireless Modbus
- Room controller
- EtherCAT P
- Accessory
Description
On-wall/ outdoor-/ wet room temperature
measuring transducers THERMASGARD® ATM 2 - EtherCAT P
measuring transducers THERMASGARD® ATM 2 - EtherCAT P
Interconnective THERMASGARD® ATM2 - EtherCAT P outside temperature measuring transducer with M8 plug-in connector (EtherCATP-encoded), Bluetooth-enabled, in an impact resistant plastic housing with quick-locking screws, optionally with/without display and bar graph.
The on-wall sensor serves to detect the temperature in gaseous media. It is used outdoors or in wet rooms, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation on outside walls is preferably performed on the north side or in a protected place. In cases of direct solar irradiation, a WS 03 (accessory) weather and sun protection hood (accessory) should be used. The sensor is factory-calibrated.
The on-wall sensor serves to detect the temperature in gaseous media. It is used outdoors or in wet rooms, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation on outside walls is preferably performed on the north side or in a protected place. In cases of direct solar irradiation, a WS 03 (accessory) weather and sun protection hood (accessory) should be used. The sensor is factory-calibrated.
EtherCATP-enabled measuring transducer for industrial requirements with maximum reliability: includes easy PLC integration using the devices ESI configuration file, diagnostics (such as communication failure counter), advanced setting options, access to historical data (min/max) and sensor service interval determination. Optionally with large back-lit three-line display (customised programming in the 7-segment and dot-matrix ranges and bar graph (7-digit, LEDs freely configurable) for graphical display, e.g. as a traffic light indicator.
Technical details
Voltage supply
24VDC via EtherCATP (US)
Power consumption
< 3 W
Radio technology
Bluetooth (LE)
Sensor
Pt1000, DIN EN 60751, class B
(Perfect Sensor Protection)
(Perfect Sensor Protection)
Measuring range
-58...+302°F
Accuracy
typically ± 0.4 °F at +77 °F
Ambient temperature
Measuring transducer –22 … +158°F
Medium
clean air and
non-aggressive, non-combustible gases
non-aggressive, non-combustible gases
Protective tube
stainless steel, 1.4571, V4A, Ø = 0.24 in
Cable connection
M8 plug-in connector, EtherCATP-encoded
Dimensions
4.96 x 3.54 x 1,97 in (Tyr 2)
Permissible air humidity
< 95 % RH, non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 54 (according to EN 60 529) when built-in
Standards
CE conformity, according to EMC Directive 2014/ 30/ EU,
according to RED 2014/ 53/ EU
according to RED 2014/ 53/ EU