Duct air quality sensors/ controllers (VOC) AERASGARD® KLQ-SD-U

Item no. 1501-3170-1001-200

EAN 4251325616407

Product group: WG02

Patented quality product (patent no. DE 10 2014 010 719.1)
Maintenance-free AERASGARD® KLQ-SD duct air quality measuring transducer with active output, automatic calibration, in a compact plastic housing with snap-on cover, for determining the air quality (0…100% VOC). The transmitter converts the measured values into a standard signal of 0-10 V.
Maintenance-free AERASGARD® KLQ-W durct air quality measuring transducer with active/switching output, automatic calibration, in a compact plastic housing with quick-locking screws, for determining the air quality (0…100% VOC). The transmitter converts the measured values into a standard signal of 0-10 V or 4...20 mA (switchable).

The sensor device is used in offices, hotels, convention centres, apartments, shops, etc. for the purpose of evaluating the indoor climate. This enables energy-saving room ventilation on an as-needed basis, thereby reducing operating
costs and improving well-being.
The air quality is detected by a VOC sensor (mixed gas sensor for volatile organic substances). This sensor determines the load of contaminated gases in the room air, such as from cigarette smoke, body perspiration, exhaled breathing air, solvent vapours, emissions etc. With regard to the expected air contamination, low, medium or high VOC sensitivity can be selected. As an alternative, use IAQ categories to assess the room air (from excellent to unhealthy) following the guidelines of the German Federal Environmental Agency.

Voltage supply

24 V AC/ DC (± 10 %)

Power consumption

< 1.5 W/ 24 V DC typical;
< 2.9 VA/ 24 V AC typical;
peak current 200 mA

Service life

> 60 months (under normal load conditions),
depending on the type of loading and gas concentration

Measuring accuracy

± 20 % of final value (referred to calibrating gas)

Gas exchange

by diffusion

Relay output

without changeover contact

Warm up time

approx. 1 hour

Response time

approx. 1 minute,
minimum flow rate 0.3 m / s (air)

Output

(0 V = clean air, 10 V = polluted air)
0 -10 V (fixed)

Sensor

VOC sensor (metal oxide) (VOC = volatile organic compounds),
with manual calibration (via zero button),
with automatic calibration (fixed)

Measuring range

0...100 % air quality; referred to calibrating gas;
multi-range switching (selectable via DIP switches)
VOC sensitivity low, medium, high

Ambient temperature

14...+140 °F

Process connection

by mounting flange, plastic
(included in the scope of delivery)

Protective tube

PLEUROFORM, material polyamide (PA6), with torsion protection,
Ø 0.79 in, NL = 8 in, vmax = 98 ft/s (air)

Electrical connection

AWG 16 - 26 via terminal screws

Cable connection

cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 0.4 in) or
M12 connector according to DIN EN 61076-2-101 (optional on request)

Housing

plastic, UV-stabilised,
material polyamide, 30 % glass-globe-reinforced
colour traffic white (similar to RAL 9016)
ALTF 02 with snap-on lid,

Housing dimensions

2.83 x 2.52 x 1.49 in (Tyr 01)

Cable gland

M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 0.4 in

Protection class

III (according to EN 60 730)

Protection type

IP 54 (according to EN 60 529)* Housing tested,
TÜV SÜD, Report No. 713160960A (Tyr 01)
Housing in the built-in state
(permeable PLEUROFORM: IP 30)

Standards

CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU