Log in

Advantages of a customer account

  • Individual conditions
  • Individual payment methods
  • Overview of all orders
  • User administration
  • Document archive
temperature Strömung

Air flow monitor RHEASREG® KLSW 6

Item no. 1701-3022-0000-000
EAN 4251325613772
Product group: WG01

Low availability.

Usually ships in 3 to 5 days
$ 2,333.82
$ 1.961,19 + sales tax + shipping

Description

Air flow monitor RHEASREG® KLGF / KLSW
Electronic RHEASGARD® KLGF duct air flow transmitter with active output, in an impact resistant plastic housing, optionally with/without display, for determining flow velocity in m/s. The measuring transducer converts the measured value into a standard signal of 0-10 V.

ElectronicRHEASREG® KLSW duct air flow monitor with switching output (one-step or two-step relay), in a plastic housing, for determining flow velocity in m/s. Fine adjustment of the measuring range end value by the user is possible with the help of a potentiometer.
The flow sensor devices are suitable for monitoring or controlling airflow in ducts, at ventilators and dampers, for flow-dependent monitoring of humidifiers and electric heating registers according to DIN 57100, part 420, or for use in connection with DDC systems.

Technical details

Voltage supply
24 V AC/ DC
Data points
flow velocity
Start bridging
approx. 15...120 s (adjustable)
Switch-off delay
approx. 2 ...20 s (adjustable)
Operating range
0.1…15 m/ s (adjustable)
Sensitivity
0.1...5 m/ s
Output
1 or 2 potential-free relays (changeover contacts)
8 A, max. 2 kW or 0 - 10 V (relative, linearised on request)
Current consumption
approx. 3 VA
Measuring range
0.33...49.2 ft s
Medium
pollutant-free, non-precipitating air
Switching hysteresis
approx. 1…10 % (adjustable)
Process connection
by mounting flange
(included in the scope of delivery)
Max. sensor cable length
164 ft, avoid laying parallel with mains voltage-carrying lines,
or use shielded cables, minimum cross section AWG 16
per conductor, apply cable screen one-sided
Cable connection
cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 0.4 in) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
Housing
plastic, UV-stabilised,
material polyamide, 30 % glass-globe-reinforced,
colour traffic white (similar to RAL 9016)
Screwed socket
-
Cable gland
M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 0.4 in
Dimensions
4.25 x 2.76 x 2.89 in (Thor 2)
Protection class
III (according to EN 60 730) at UB = 24 V
Protection type
IP 65 (according to EN 60 529)*
Protection type housing
IP 65
Standards
CE conformity,
EMC directive 2014/ 30/ EU,
low-voltage directive 2014/ 35/ EU
Prices are now displayed including taxes