- New
- Sale
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality
- Flow
- Modbus | Wireless Modbus
- Room controller
- EtherCAT P
- Accessory
Description
Room motion sensor
KINASGARD® RBWF
The KINASGARD® RBWF motion sensor or presence detector detects the presence of persons and movements and has a switching contact as an output. The sensor detects motions over an aperture angle of 110° and a perimetre of 360°. The patented lens system with 20 individual lenses results in very small dark areas of only few centimetres in width even at a distance of 10 m, thereby reliably detecting small movements.
The device has an elegant plastic housing with snap-on cover, base with 4-hole attachment for mounting on vertically or horizontally installed in-wall flush boxes, with predetermined breaking point for on-wall cable entry. The room motion detector is used for monitoring and detecting status conditions, and for motion-dependent control of room functions, e.g. lowering the temperature in unoccupied rooms. It is installed in corridors, industrial halls, offices, residential rooms and business facilities.
Technical details
Voltage supply
24 V AC (± 20 %) and
15…36 V DC
15…36 V DC
Power consumption
< 1 W at 24 V DC; < 2 VA at 24 V AC
Output
without/ with motion + presence,
potential-free changeover contact (24 V), 1 A ohmic load
potential-free changeover contact (24 V), 1 A ohmic load
Sensor
infra-red motion sensor
Detection range
perimeter 360°, aperture angle 90°/ 110°,
reach approx. 10 m, circular
reach approx. 10 m, circular
Motion detection
of persons and objects, required temperature difference
between subject and surroundings 5 K
between subject and surroundings 5 K
After-running time
adjustable from 4 s to 16 min
Ambient temperature
0...+50 °C
Electrical connection
0.14 - 1.5 mm²
via terminal screws on circuit board
via terminal screws on circuit board
Housing
plastic, material ABS,
colour pure white (similar to RAL 9010)
colour pure white (similar to RAL 9010)
Dimensions
85 x 85 x 27 mm (Baldur 1)
Installation
wall mounting or on in-wall flush box, Ø 55 mm,
base with 4 holes, for attachment to vertically or
horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry
from top/ bottom in case of plain on-wall installation
base with 4 holes, for attachment to vertically or
horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry
from top/ bottom in case of plain on-wall installation
Protection class
III (according to EN 60 730)
Protection type
IP 30 (according to EN 60 529)
Standards
CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU