Outdoor motion sensor KINASGARD® ABWF-W

Item no. 1401-1110-4000-000

EAN 4251325612874

Product group: WG01

Outdoor motion sensor KINASGARD® ABWF

The KINASGARD® ABWF motion/presence transmitter detects the presence of persons and movements. It serves to monitor and detect status conditions and to control motion-dependent room functions, e.g. as a motion detector for lowering the temperature of unoccupied rooms.
The motion sensor device is used in corridors, outdoor areas, industrial halls, offices, residential and commercial premises. The sensor detects movements over an aperture angle of 110° and a perimetre of 360°.

The patented lens system with 20 individual lenses results in very small dark areas of only a few centimetres in width even at a distance of 10 m, thereby reliably detecting small movements. The sensor recognises changes in the infra-red radiation spectrum, i.e. heat radiation, resulting from the movement of persons or objects. Such movements generate a temporary change of the temperature gradient in the field. Due to the constant presence of body (heat) radiation, this sensor device is ideally suitable for detecting persons. The temperature difference between sensor and object must be >5 K.

Voltage supply

24 V AC (± 20 %) and
15…36 V DC

Power consumption

< 1 W at 24 V DC; < 2 VA at 24 V AC

Output

without/ with motion + presence,
potential-free changeover contact (24 V), 1 A ohmic load

Sensor

infra-red motion sensor

Detection range

perimeter 360°, aperture angle 90°/ 110°,
reach approx. 10 m, circular

Motion detection

perimeter 360°, aperture angle 90°/ 110°,
reach approx. 10 m, circular

After-running time

adjustable from 4 s to 16 min

Ambient temperature

–10...+50 °C

Electrical connection

0.14 - 1.5 mm²
via terminal screws on circuit board

Cable connection

cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)

Housing

plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)

Housing dimensions

72 x 64 x 37,8 mm (Tyr 1)

Cable gland

M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm

Dimensions

72 x 64 x 37,8 mm (Tyr 1)

Installation

on-wall

Protection class

III (according to EN 60 730)

Protection type

IP 65 (according to EN 60 529)*