Multifunctional on-wall sensors and measuring transducers, for temperature and CO2 content AERASGARD® ATM-CO2-SD-U

Item no. 1501-7112-1001-200

EAN 4251325616346

Product group: WG02

Multifunctional on-wall sensors and measuring transducers, for temperature and CO2 content AERASGARD® ATM-CO2 - SD

Maintenance-free AERASGARD® ATM - CO2 - SD on-wall air climate transmitter with active output, automatic calibration (fixed), in an impact resistant plastic housing with quick-locking screws, for determining the CO2 content of the air (0...2000 ppm / 0...5000 ppm) and the temperature (–35...+80 °C). The measuring transducer converts the measured values into a standard signal of 0-10 V.

The sensor device is used in offices, hotels, convention centres, apartments, shops, etc. for the purpose of evaluating the indoor climate. This enables energy-saving room ventilation on an as-needed basis, thereby reducing operating costs and improving well-being.

A long-term stable, digital humidity and temperature sensor guarantees precise measuring results.

The CO2 content is measured using an optical NDIR sensor (non-dispersive infra-red technology). The detection range is calibrated for standard applications such as the monitoring of residential and conference rooms.

The air quality is detected by a VOC sensor (mixed gas sensor for volatile organic substances). This sensor determines the load of contaminated gases in the room air, such as from cigarette smoke, body perspiration, exhaled breathing air, solvent vapours, emissions from building components, etc. Low, medium or high VOC sensitivity can be selected depending on the expected air contamination.

Voltage supply

24 V AC/ DC (± 10 %)

Power consumption

< 4.8 W/ 24 V DC typical; < 6.8 VA/ 24 V AC typical; peak current 200 mA

Measuring range, temperature

–35...+80 °C (output equivalent to 0 -10 V or 4...20 mA)

Operating range, temperature

–10...+60 °C

Temperature deviation

typically ± 0.2 K at +25 °C

Output, temperature

0 -10 V (fixed)

Measuring range, CO2

multi-range switching (selectable via DIP switches)
0...2000 ppm; 0...5000 ppm

Sensor, CO2

optical NDIR sensor
(non-dispersive infra-red technology),
with manual calibration (via zero button) and
automatic calibration (fixed)

Output, CO2

0 -10 V (fixed)

Measuring accuracy, CO2

typically ± 30 ppm ± 3 % of measured value

Temperature dependence, CO2

± 5 ppm/ °C or ± 0.5 % of measured value/ °C
(whichever is higher)

Pressure dependence

± 0,13 %/ mm Hg

Gas exchange

by diffusion

Relay output

without changeover contact

Response time

< 2 minutes

Output

0 -10 V (fixed)

Ambient temperature

–10...+60 °C

Process connection

by screws

Protective tube

stainless steel V2A (1.4301), Ø 16 mm, NL = 55 mm

Electrical connection

0.14 - 1.5 mm² via terminal screws

Housing

plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)

Housing dimensions

126 x 90 x 50 mm (Tyr 2)

Cable gland

M 16 x 1.5; including strain relief,
exchangeable

Long-term stability

< 2 % in 15 years

Protection class

III (according to EN 60 730)

Protection type

IP 65 (according to EN 60 529)*

Standards

CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU