- New
- Sale
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality
- Flow
- Rymaskon
- Modbus | Wireless Modbus
- EtherCAT P
- Accessory
Description
Duct humidity and temperature sensor
HYGRASGARD® KFTF-35
Condensation-protected ductsensor HYGRASREG® KFTF-35 with active and switching output, housing made of
impact-resistant plastic with quick-locking screws, cable gland, plastic sinter filter (replaceable), optionally
with/ without display, for detecting relative humidity (0…100 % RH) and temperature (4 switchable measuring
ranges, max. 0...+100 °C) as well as for determining various parameters of humidity measurement technology.
The measuring transducer converts the measured variables into a standard signal of 0 - 10 V or 4…20 mA.
The unit is specially designed for use in the high humidity range (95…99 % RH). A long-term stable, digital
humidity and temperature sensor is used. Overtemperature prevents or hinders dew formation on the humidity
sensor. A second, separate temperature measuring element is used to determine the actual relative humidity
of the ambient air. The following measured variables are calculated internally from these parameters and are
retrievable via output OUT3: absolute humidity, mixing ratio, dew point and wet bulb temperature (can be
changed via DIP switch).
The sensor is used in medical technology, refrigeration technology, control technology, air conditioning and clean room technology. The sensor is factory-calibrated; an environmental precision adjustment by an expert is possible.
The sensor is used in medical technology, refrigeration technology, control technology, air conditioning and clean room technology. The sensor is factory-calibrated; an environmental precision adjustment by an expert is possible.
Technical details
Voltage supply
24 V AC/ DC
Power consumption
< 3 VA/ 24 V DC ; when heating
Data points
Temperature [°C], relative humidity [% RH], absolute humidity [g / m3],
dew point [°C], mixing ratio [g / kg], wet bulb temperature [°C]
dew point [°C], mixing ratio [g / kg], wet bulb temperature [°C]
Measuring range, humidity
0...100 % RH
Operating range, humidity
10 … 99 % RH (probe), 10 … 95 % RH (housing)
Deviation of humidity
± 2 % r. H. (40…60 %) at + 20 °C,
Measuring range, temperature
0...+50 / –20...+50 / –20...+80 / 0...+100 °C
Operating range, temperature
0...+50 °C
Temperature deviation
± 0.5 K at + 20 °C
Sensor protection
metal sinter filter, exchangeable
Current consumption
max. 100 mA when heating
Measuring ranges
0...100 % RH
0...+50 / –20...+50 / –20...+80 / 0...+100 °C
0...+50 / –20...+50 / –20...+80 / 0...+100 °C
Ambient temperature
storage - 25 …+ 60 °C,
operation -5 …+ 55 °C
operation -5 …+ 55 °C
Process connection
by mounting flange, plastic
(included in the scope of delivery)
(included in the scope of delivery)
Electrical connection
3- or 4-wire connection
0.14 -1.5 mm ² via terminal screws on circuit board
0.14 -1.5 mm ² via terminal screws on circuit board
Cable gland
M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
max. inner diameter 10.4 mm
Dimensions
108 x 70 x 73,5 mm (Thor 2)
Protection class
III (according to EN 60 730)
Protection type
IP 65 (according to EN 60 529)*
Protection type housing
IP 65
Protective tube
PLEUROFORM, material polyamide (PA6), with torsion protection,
Ø 20 mm, NL = 235 mm (optionally 100 mm), vmax = 30 m/s (air)
Ø 20 mm, NL = 235 mm (optionally 100 mm), vmax = 30 m/s (air)
Function
High humidity range (95...99 % RH), dew protected
Housing
plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
Standards
CE conformity, electromagnetic compatibility
according to EN 61 326 + A1 + A2,
EMC directive 2004/ 108/ EC
according to EN 61 326 + A1 + A2,
EMC directive 2004/ 108/ EC