- New
- Sale
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality
- Flow
- Modbus | Wireless Modbus
- Room controller
- EtherCAT P
- Accessory
Description
Display module for pressure transmitters
The display module LCD-SHD has been specially designed for the pressure transmitter PREMASGARD® SHD / SHD-SD / SHD 692 with active output (0-10 V / 4...20 mA) and connector DIN EN 175301-803-A. The display can be mechanically rotated and tilted, and the display content can be rotated in increments of 90° to achieve the ideal reading position. In addition to the actual pressure, it can display the min/max measured values or alternatively the output signal of the sensor.
The configured display unit transmits the standard signals from the pressure measuring transducer unchanged and uses them to calculate the pressure in the selected unit for the display. The following parameters can be set: Measuring range of the sensor, physical unit (bar / kPa / psi / inWC / mWC / atm), interval of the min/max values (1h / 6h / 12h / 24h / ∞), number of values for averaging, display mode, direction of the display content, contrast and backlight (for U variant). The unit is configured using micro button switches on the circuit board inside the housing.
Technical details
Compatibility
pressure measuring transducer type SHD / SHD-SD / SHD 692,
other manufacturers on request
other manufacturers on request
Display unit
pressure [bar] [kPa] [psi] [inWC] [mWC] [atm],
voltage [V] or current [mA]
voltage [V] or current [mA]
Temperature dependence
typically < 0.01 % final value/K
Voltage supply
24 V AC/DC (± 5 %)
Power consumption
< 0,85 W
Data points
Pressure [bar] [kPa] [psi] [inWC] [mWC] [atm]
Load resistance
RL > 100 kOhm
Response time
Sensor-dependent settings for averaging (only applies to display)
Input
0 - 10 V
Output
0 - 10 V
Standard signals from the sensor are forwarded.Indication values on the display are calculated.
Standard signals from the sensor are forwarded.Indication values on the display are calculated.
Operation
for SHD/ SHD-SD/ SHD 692
U-Variant (0 - 10 V)
U-Variant (0 - 10 V)
Connection type
3-wire connection
Measuring function
Min/max values / averaging
Measuring range
sensor-dependent,
measuring range and output unit are configured via the menu
measuring range and output unit are configured via the menu
Type of pressure
relative pressure, differential pressure
Accuracy
typically < 0.2 % final value
Ambient temperature
Storage -20...+75 °C
Operation 0...+60 °C
Operation 0...+60 °C
Electrical connection
via connector DIN EN 175301-803-A
Housing
Display housing: plastic, flame retardant (UL 94 V-0), material PC/ABS,
colour black (similar to RAL 9004),
housing cover for display is transparent,
with quick-locking screws (slotted/Phillips head combination),
rotatable and tiltable, dimensions: approx. 72 x 64 x 43.3 mm
colour black (similar to RAL 9004),
housing cover for display is transparent,
with quick-locking screws (slotted/Phillips head combination),
rotatable and tiltable, dimensions: approx. 72 x 64 x 43.3 mm
Adapter housing: plastic, flame retardant (UL 94 V-0), material PC/ABS,
colour black (similar to RAL 9004),
dimensions: approx. 102 mm, Ø 40 mm
colour black (similar to RAL 9004),
dimensions: approx. 102 mm, Ø 40 mm
Installation
simple plug-in assembly,
fastened via screw extension
(included in the scope of delivery)
fastened via screw extension
(included in the scope of delivery)
Protection class
III (according to EN 60 730)
Protection type
IP 65 (according to EN 60 529)*
Standards
CE conformity according to EMC Directive 2014 / 30 /EU
Display
LCD display: with backlight,
cut-out approx. 28 x 16 mm (W x H), configurable,
to display the actual pressure, min/max pressure or
output signal of the sensor
cut-out approx. 28 x 16 mm (W x H), configurable,
to display the actual pressure, min/max pressure or
output signal of the sensor
Features
15 predefined measuring ranges 1x freely definable measuring range
Units
bar, kPa, psi, inWC, atm, mWC