- New
- Sale
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality
- Flow
- Modbus | Wireless Modbus
- Room controller
- EtherCAT P
- Accessory
Description
Ceiling built-in motion sensor
KINASGARD® DBWF-W
The KINASGARD® DBWF ceiling motion sensor detects the presence of persons and movements and has a switching contact as an output (changeover contact). The motion detector is used for monitoring and detecting status conditions and for motion-dependent control of room functions, e.g. lowering the temperature of unused rooms.
The ceiling motion sensor is installed in suspended ceilings of corridors, offices, residential and business facilities. The measuring transducer is accommodated in a separate housing. The sensor detects motion over an aperture angle of 110° and a perimetre of 360°. The patented lens system with 20 individual lenses results in very small dark areas of only a few centimetres in width even at a distance of 10 m, thereby reliably detecting small movements.
Technical details
Voltage supply
24 V AC (± 20 %) and
15…36 V DC
15…36 V DC
Power consumption
< 1 W at 24 V DC; < 2 VA at 24 V AC
Output
potential-free changeover contact (24 V), 1 A ohmic load
Sensor
infra-red motion sensor
Detection range
perimeter 360°, aperture angle 90°/ 110°,
reach approx. 10 m, circular, at an installation height of approx. 3 m
the sensor covers a detection radius (r) of approx. 3.4 m
reach approx. 10 m, circular, at an installation height of approx. 3 m
the sensor covers a detection radius (r) of approx. 3.4 m
Motion detection
of persons and objects, required temperature difference
between subject and surroundings 5 K
between subject and surroundings 5 K
After-running time
adjustable from 4 s to 16 min
Ambient temperature
–10...+50 °C
Electrical connection
0.14 - 1.5 mm² via terminal screws
Cable connection
cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
M12 connector according to DIN EN 61076-2-101 (optional on request)
Housing
plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
Housing dimensions
72 x 64 x 37,8 mm (Tyr 1)
Cable gland
M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
max. inner diameter 10.4 mm
Connecting head
plastic, material polycarbonate (PC),
colour white (can be painted as an option), pluggable
colour white (can be painted as an option), pluggable
sensor cable
PVC, LiYY, 4 x 0.14 mm²,
KL = approx. 2 m
KL = approx. 2 m
Installation
sensor:inside suspended ceiling,
ceiling cutout Ø = 30 mm,
cover Ø = < 35 mm
ceiling cutout Ø = 30 mm,
cover Ø = < 35 mm
Protection class
sensor:III (according to EN 60 730)
Protection type
IP 65 (according to EN 60 529) Housing tested,
TÜV SÜD, Report No.713139052 (Tyr 1)
TÜV SÜD, Report No.713139052 (Tyr 1)
Protection type (sensor)
IP 30 (according EN 60 529) Sensor in the built-in state
Standards
CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU