Für jede Anwendung die richtige Lösung
Patented quality product (pro-dynamic cross convection patent no. DE 10 2012 015 726.6)
The condensation control switch HYGRASREG® KW with terminal box enclosure made of impact-resistant plastic and with an enclosure cover with quick-locking screws or the cost-effective HYGRASREG® KW - SD with snap-on lid is installed on cooling ceilings, on cooling ⁄cold-water piping or on cooled surfaces and is designed to prevent the formation of condensation. It reliably detects formation of dew by means of its humidity and temperature sensor (no conductivity measurement) and, thanks to its measuring method, pro-dynamic cross convection, yields an exact measurement result (with LED status indicator). Dew point temperature is that temperature at which air reaches the state of saturation and water vapour starts to condensate. The KW condensation control switch can be operated as a monitor on cooling ceilings or pipes so that the switching output is activated when dew builds up on the cooling ceilings of the property to be monitored and e.g. a heating system is started, or other actuators are initiated.
24 V AC (± 20 %) and
15…36 V DC
|Switchpoint||approx. 93 % r.H. (permanently set)|
|Power consumption||< 1.1 VA ⁄ 24 V DC ; < 2.2 VA ⁄ 24 V AC|
|Output signal||potential-free changeover contact (24 V), 1 A ohmic load|
endless metal strap with metal tightener,
300 mm, for pipes up to 3 ''
(included in scope of delivery)
|Electrical connection||0.14 - 1.5 mm² via terminal screws|
material polyamide, 30 % glass-globe-reinforced
colour traffic white (similar to RAL 9016)
ALTF 02 with snap-on lid,
|Enclosure dimensions||72 x 64 x 37,8 mm (Tyr 01)|
2x M 12 x 1.5 (Y-adapter); with strain relief,
exchangeable, max. inner diameter 6 mm
The mounting position should be selected
so that no condensate can enter the sensor system
in the event that condensation forms! KW - SD
with strap for direct mounting on pipes or
for direct mounting on flat surfaces (e.g. walls, ceilings) KW - SD - external
with detached sensor head
(cable length KL = 1.5 m) for mounting on pipes
|Protection class||III (according to EN 60 730)|
|Protection type||IP 43 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
The relay output is triggered (contact 13 -11 closed)
LED short pulses =
LED long pulses =
GET Nord - S+S Regeltechnik is er
22. - 24.11.2018
Wees onze gast op de internationale vakbeurs voor elektriciteit, sanitair,...
SPS IPC Drives – S+S Regeltechnik will be there
27. - 29.11.2018
Be our guest at Europe's leading trade fair for electric automation from 27 to...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...