Efficiënt, koppelbaar en comfortabel

Elegant uiterlijk, aanraakoppervlak, groot display, voor Modbus-geschikt

RYMaskon

Good room climate is measurable!

Active and Modbus capable room sensors for temperature, humidity and CO2 now also for in-wall installation!

AERASGARD® FSCO2

All quite relative

Pressure measuring transducer for gaseous and liquid media in cost-efficient Standard version for 0 to 16 bar

PREMASGARD® SHD-SD

VOC in focus

Room and duct sensors for detection of mixed gases in cost-efficient Standard versions

AERASGARD® RLQ-SD

Für jede Anwendung die richtige Lösung

RTM-CO2-SD-U

AERASGARD® RTM-CO2-SD-U

Art.nr. 1501-61B2-1001-200
EAN 4 251325 616377

The maintenance-free microprocessor-controlled room sensor AERASGARD® RTM - CO2 - SD  with automatic calibration is used for detecting the CO2 content of the air within a range of 0...2000 ppm and the temperature within a range of 0...+50°C. The measured values are converted into standard signals of 0 -10 V. 

Elegant enclosure made of plastic, with snap-on lid, base with 4-hole attachment, for installation on vertically or horizontally installed in-wall flush boxes, with predetermined breaking point for on-wall cable entry. The relative humidity (% r.H.) quotient of water vapour partial pressure divided by the saturation vapour pressure at the respective gas temperature. A digital, long-term stable sensor used as measuring element for relative air humidity and temperature guarantees exact measurement results. The air quality is determined based on a (VOC) gas mixture sensor. The CO2 content of the air is measured using an optical NDIR sensor (non-dispersive infra-red technology).

202,98 € netto
Power consumption < 1.5 W ⁄ 24 V DC typical;
< 2.9 VA ⁄ 24 V AC typical;
peak current 200 mA
Deviation of humidity typical ± 2 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3 % r. H.
Measuring range, temperature 0...+ 50 °C (output equivalent to 0 -10 V or 4...20 mA)
Operating range, temperature 0...+50 °C
Temperature deviation ± 0.2 K at +25 °C
Output, temperature 0 -10 V or 4...20 mA (selectable via DIP switches)
Measuring range, CO2 0...2000 ppm
Sensor, CO2 optical NDIR sensor,
(non-dispersive infra-red technology)
with automatic calibration
Output, CO2 0 - 10 V
Measuring accuracy, CO2 ± 30 ppm ± 3 % of measured value
Temperature dependence, CO2 ± 5 ppm ⁄ °C or ± 0.5 % of measured value ⁄ °C
(whichever is higher)
Pressure dependence ± 0,13 % ⁄ mm Hg
Gas exchange by diffusion
Relay output without changeover contact
Warm up time approx. 1 hour
Response time < 2 minutes
Output 0 - 10 V
Ambient temperature 0...+50 °C
Electrical connection 0.14 - 1.5 mm² via terminal screws
Enclosure plastic, material ABS,
colour pure white (similar to RAL 9010)
Dimensions 98 x 98 x 33 mm (Baldur 2)
Installation wall mounting or on in-wall flush box, Ø 55 mm,
base with 4 holes, for attachment to vertically or
horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry
from top ⁄ bottom in case of plain on-wall installation
Long-term stability < 2 % in 15 years
Protection class III (according to EN 60 730)
Protection type IP 30 (according to EN 60 529)
Standards CE conformity, electromagnetic compatibility
according to EN 61 326, EMC Directive 2014 ⁄ 30 ⁄ EU,
Low Voltage Directive 2014 ⁄ 35 ⁄ EU

S+S Regeltechnik - voordelen tot de vijfde macht

Meer te weten komen

Nieuws van S+S Regeltechnik

BeursnieuwsAlle aangeven

 

ISH beurs Frankfurt – S+S Regeltechnik kijkt naar u uit!
10. - 15.03.2019

Stand 10.3 A71
Op de ISH, 's werelds grootste beurs voor "belevingswereld badkamer, gebouw-,...
meer

Overzicht van alle beursdata

ProductnieuwsAlle aangeven

 

Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems

This bus capable and calibratable pressure measuring transducer enables the control of differential...
meer

 

Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus

Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...
meer

Beursnieuws

ISH | 10. - 15.03.2019 | Stand 10.3 A71

meer

Abonneren op Newsletter

Blijf altijd geïnformeerd over onze producten en nieuws rond S+S Regeltechnik.