Efficiënt, koppelbaar en comfortabel

Elegant uiterlijk, aanraakoppervlak, groot display, voor Modbus-geschikt

RYMaskon

Good room climate is measurable!

Active and Modbus capable room sensors for temperature, humidity and CO2 now also for in-wall installation!

AERASGARD® FSCO2

All quite relative

Pressure measuring transducer for gaseous and liquid media in cost-efficient Standard version for 0 to 16 bar

PREMASGARD® SHD-SD

VOC in focus

Room and duct sensors for detection of mixed gases in cost-efficient Standard versions

AERASGARD® RLQ-SD

Für jede Anwendung die richtige Lösung

Kanaal-CO2-sensor
AERASGARD® KCO2-W

AERASGARD® KCO2-W

Patented quality product (patent no. DE 10 2014 010 719.1)

The maintenance-free microprocessor-controlled duct sensor AERASGARD® KCO2 - SD with automatic
calibration (fixed), enclosure with snap-on lid, without display, is used for detecting the CO2 content
of the air within a range of 0...2000 ppm or 0...5000 ppm. The measurement value is converted into
standard signal of 0 -10 V.

The maintenance-free microprocessor-controlled duct sensor AERASGARD® KCO2 - W with automatic
calibration (can be deactivated via DIP switches), enclosure with quick-locking screws, optionally
with / without display, is used for detecting the CO2 content of the air within a range of 0...2000 ppm
or 0...5000 ppm. The measurement value is converted into standard signal of 0 -10 V or 4...20 mA.

The CO2 content of the air is measured using an optical NDIR sensor (non-dispersive infra-red
technology). The detection range of the CO2 sensor is calibrated for standard applications such as
monitoring residential rooms and conference rooms. Room ventilation on an as-needed basis, improved
well-being and customer benefit, increased comfort as well as reduced operating costs
through energy conservation are just some of the benefits of employing AERASGARD® CO2 sensors.

A measuring system based on NDIR (non-dispersive infra-red technology) for CO2 measurement
consists of a light source and a receptor. A certain range of wavelengths of light radiated by the
source is damped and absorbed by CO2 molecules in the measured section. This damping is detected
by the receptor.

CO2: 0...2000ppm / 5000ppm switchable, 
Output: 0-10V / 4...20mA switchable, with Changeover contact

Type Kommunikation Uitvoering Display Meetbereik CO2 1. Temperatuurbereik Arbeitsdruck PN max. Bedrukking Buttons Control Functie Hulslengte Kleur Kleur behuizing Kommunikation Materiaal Measuring range relative humidity Messbereiche CO2 Movement Output Output-soort Prozessanschluß (SW) Roedelengte Rohr Ø DN Sensor-Toleranz Feuchte Temperature-measuring range Voor inzetlengte Channels Sensor VOC measuring range Vrije kabellengte Enclosure name Kabelmateriaal Measuring range pressure Art.nr. Prijs
KCO2-W change over contact 5000 ppm CO2 1501-3140-7301-200 255,00 €
KCO2-W DISPLAY change over contact 5000 ppm CO2 1501-3140-7321-200 297,33 €
KCO2-SD-U - 5000 ppm CO2 1501-3160-1001-200 211,60 €

S+S Regeltechnik - voordelen tot de vijfde macht

Meer te weten komen

Nieuws van S+S Regeltechnik

BeursnieuwsAlle aangeven

 

ISH beurs Frankfurt – S+S Regeltechnik kijkt naar u uit!
11. - 15.03.2019

Stand 10.3 A71
Op de ISH, 's werelds grootste beurs voor "belevingswereld badkamer, gebouw-,...
meer

Overzicht van alle beursdata

ProductnieuwsAlle aangeven

 

Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems

This bus capable and calibratable pressure measuring transducer enables the control of differential...
meer

 

Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus

Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...
meer

Beursnieuws

ISH | 11. - 15.03.2019 | Stand 10.3 A71

meer

Abonneren op Newsletter

Blijf altijd geïnformeerd over onze producten en nieuws rond S+S Regeltechnik.