Efficient, convenient and network-enabled

Elegant appearance, touch-operated interface, large display, and Modbus-compatible

RYMaskon

Satisfied customers drive our business

An overview of our references

Learn more

Good room climate is measurable!

Active and Modbus capable room sensors for temperature, humidity and CO2 now also for in-wall installation!

AERASGARD® FSCO2

All quite relative

Pressure measuring transducer for gaseous and liquid media in cost-efficient Standard version for 0 to 16 bar

PREMASGARD® SHD-SD

VOC in focus

Room and duct sensors for detection of mixed gases in cost-efficient Standard versions

AERASGARD® RLQ-SD

Für jede Anwendung die richtige Lösung [Translate]

FS2-U

THERMASREG® FS2-U

Item No. 1102-1011-0102-020
EAN 4 251325 616957

Electronic frost protection thermostat ⁄ frost monitor THERMASREG® FS with continuous and switching output, fully-active copper sensor rod, with additional control input 0 - 10 V and summation output 0 - 10 V. The frost sensor is used to monitor air conditioning systems, heat exchangers, heating registers and similar equipment to prevent frost damage and freezing up. Falling below the limit value at the coldest measuring point of the capillary tube is detected.
In case of capillary breakage, power failure, or electrical damage to at the device, the relay in the frost monitor automatically switches to frost.
MK-05-K mounting clamps are included in the scope of delivery.

238,68 € net
Voltage supply 24 V AC ⁄ DC
Load resistance RL > 5 kOhm
Switch-on ⁄ start-up time < 1 min
Response time t90 < 5 s
Output 1 x 0 -10 V (equivalent to 0...+15 °C)
1 x 0 -10 V summation output (frost signal and control voltage)
1 x potential-free changeover contact (24 V),
setting range 0...+15 °C
Measuring range 0...+15 °C
Accuracy ± 1 K (at +10 °C)
Ambient temperature (Enclosure) –15...+50 °C
Process connection by mounting clamps MK- 05 - K
(included in the scope of delivery)
Electrical connection 0.14 - 1.5 mm² via terminal screws
Enclosure plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016)
Enclosure dimensions 126 x 90 x 50 mm (Tyr 2)
Cable gland 2x M 12 x 1.5 (Y-adapter); with strain relief,
exchangeable, max. inner diameter 6 mm
Sensor and capillary copper, active over the entire sensor length, min. 25 cm
Temperature (Sensor and capillary) –20...+60 °C
(capillary tube at a distance > 20 cm away from enclosure)
Hysteresis of switching step 2K
Permissible air humidity < 95 % r. H., non-precipitating air
Protection class III (according to EN 60 730)
Protection type IP 65 (according to EN 60 529)
Standards CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU

S+S Regeltechnik - Benefits to the power of five

Learn more

S+S Regeltechnik News

Exhibition Newsshow all

 

GET Nord - S + S Regeltechnik is here
22. - 24.11.2018

Booth B4.04.151.
Be our guest at the international trade fair for electrical, sanitary, heating...
more

 

SPS IPC Drives – S+S Regeltechnik will be there
27. - 29.11.2018

Booth 10.1-120
Be our guest at Europe's leading trade fair for electric automation from 27 to...
more

Overview of all exhibition dates

Product Newsshow all

 

Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems

This bus capable and calibratable pressure measuring transducer enables the control of differential...
more

 

Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus

Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...
more

Exhibition News

GET Nord | 22. - 24.11.2018 | Stand B4.04.151

more

Newsletter Subscription

Stay always informed about our products and news from S+S Regeltechnik