Multi-funtional duct sensor
For humidity, temperature, pressure, differential pressure and volume flow for monitoring and controlling heating, ventilation and air-conditioning systemsPREMASGARD® 814x-Modbus
Für jede Anwendung die richtige Lösung [Translate]
Calibratable outside temperature measuring transducer THERMASGARD® ATM 2
with eight switchable measuring ranges, external sensor, continuous output, housing made from
impact-resistant plastic with quick-release screws, optionally with/ without display, with cable
fitting or bushing for M12 connector according to DIN EN 61076-2-101.
Calibratable outside temperature measuring transducer THERMASGARD® ATM 2 with eight switchable measuring ranges, external sensor, continuous output, housing made from impact-resistant plastic with quick-release screws, optionally with/ without display, with cable fitting or bushing for M12 connector according to DIN EN 61076-2-101.
It is used to detect outside temperatures, temperatures in wet rooms, e.g. for installation on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas preferably at the north side of a building or in a protected place.
In case of direct solar irradiation, we recommend the use of our sun and ball-impact protection hood WS 01 or WS 04 (accessories) or the device version with the installed sun protection hood SS 02 (on request).
The measuring transducer is factory-calibrated. Adjustment/ fine adjustment by the user is possible (range and zero point are adjustable).
15...36 V DC
depending on working resistance, residual ripple stabilised ± 0.3 V
|Power consumption||< 1 VA/ 24 V DC|
|Working resistance||Ra (ohm) = (Ub -14 V)/ 0.02 A for I variant|
|Temperature deviation||typically ± 0.2 K at +25 °C|
Pt1000, DIN EN 60751, class B
(Perfect Sensor Protection)
|Connection type||2- or 3-wire connection|
multi-range switching with 8 switchable measuring ranges,
see table (other ranges optional)
operating range –30...+70 °C
with manual zero point correction (± 10 K)
|Ambient temperature||Measuring transducer –30...+70 °C|
|Process connection||by screws|
|Protective tube||stainless steel V4A (1.4571), Ø 6 mm, NL = 65 mm|
|Electrical connection||0.14 - 1.5 mm² via terminal screws|
bushing for M12 connector
according to DIN EN 61076-2-101
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
|Housing dimensions||72 x 64 x 37,8 mm (Tyr 1)|
|Permissible air humidity||< 95 % r. H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
sps smart production solutions – S+S Regeltechnik will be there 26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 26 to 28 November 2018.
THERMASGARD® TM65-Modbus -T3 - Calibratable immersion, screw-in or duct temperature measuring transducer
Patented high-quality product (patented immersion sensor, DE 10 2012 017 500.0) – basic device with...
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...