Für jede Anwendung die richtige Lösung [Translate]
Calibratable temperature measuring transducer with sleeve sensor THERMASGARD® HFTM
with eight switchable measuring ranges, continuous output, housing made from impact-resistant
plastic with quick-release screws, optionally with/ without display, with cable fitting or bushing for
M12 connector according to DIN EN 61076-2-101.
Calibratable temperature measuring transducer with sleeve sensor THERMASGARD® HFTM - VA with eight switchable measuring ranges, continuous output, housing made from stainless steel V4A with cable fitting or bushing for M12 connector according to DIN EN 61076-2-101.
The temperature transmitter with remote sensor is used to detect temperatures in liquid and gaseous media e.g. if installed in an immersion sleeve or as a duct sensor.
The measuring transducer is factory-calibrated. Adjustment/ fine adjustment by the user is possible (zero point offset is adjustable). A direct, permanent use in liquids is possible in combination with immersion sleeves THE.
15...36 V DC
depending on working resistance, residual ripple stabilised ± 0.3 V
|Power consumption||< 1 VA/ 24 V DC|
|Working resistance||Ra (ohm) = (Ub -14 V)/ 0.02 A for I variant|
|Temperature deviation||typically ± 0.2 K at +25 °C|
Pt1000, DIN EN 60751, class B
(Perfect Sensor Protection)
sensor sleeve, stainless steel V4A (1.4571), Ø = 6 mm,
nominal length NL = 50 mm (other dimensions optionally available)
cable entry stamped (optionally rolled)
|Connection type||2- or 3-wire connection|
multi-range switching with 8 switchable measuring ranges,
see table (other ranges optional)
with manual zero point correction (± 10 K)
|Ambient temperature||Measuring transducer –30...+70 °C|
≥ 100 MΩ,
at +20 °C (500V DC)
|Electrical connection||0.14 - 1.5 mm² via terminal screws|
cable fitting, brass, nickel-plated
(M 20 x 1.5; with strain relief, exchangeable,
inner diameter 6 - 12 mm)
stainless steel V4A (1.4571),
with non-distortion cover bolting,
impact-resistant, high EMI shielding,
corrosion, temperature, UV and weathering resistant
|Housing dimensions||143 x 97 x 61 mm (Tyr 2E)|
silicone, SiHF, 2 x 0.25 mm², KL = 1.5 m (other lengths and
range limits optional, e.g. PTFE leads up to +250 °C
or glass fibre with steel wire mesh up to +350°C)
|Permissible air humidity||< 95 % r. H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
IP 67 (according to EN 60 529) only housing!
IP 65 (according to EN 60 529) humidity-tight stamped
IP 68 (optional sensor sleeve watertight compound-filled)
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
sps smart production solutions – S+S Regeltechnik will be there 26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 26 to 28 November 2018.
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...
PREMASGARD® 814x-Modbus - Multi-funtional duct sensor
This bus capable and calibratable pressure measuring transducer enables the control of differential...