- New
- Sale
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality
- Flow
- Modbus | Wireless Modbus
- Room controller
- EtherCAT P
- Accessory
Description
Sleeve temperature measuring transducer
THERMASGARD® HFTM - Modbus - SD
Calibratable THERMASGARD® HFTM - Modbus temperature measuring transducer with sleeve sensor, Modbus connection, terminal box housing made of impact resistant plastic, housing cover with quick-locking screws, with/without optional display for indicating the actual temperature.
The temperature transmitter with remote sensor serves to detect temperatures in liquid and gaseous media e.g. if installed in a thermowell or as a duct sensor. The device is factory-calibrated. Adjustment/Fine-tuning by the user is possible (zero-point offset is adjustable).
Technical details
Voltage supply
24 V AC (± 20 %) and
15…36 V DC
15…36 V DC
Power consumption
< 1,0 W/ 24 V DC
< 2,2 VA/ 24 V AC
< 2,2 VA/ 24 V AC
Sensor
Pt1000, DIN EN 60751, class B
Measuring range
–50...+150 °C
Accuracy
typically ± 0.2 K at +25 °C
Zero point offset
± 10 °C
Ambient temperature
Measuring transducer –30...+70 °C
Medium
clean air and
non-aggressive, non-combustible gases
non-aggressive, non-combustible gases
Error detection
sensor breakage, sensor short circuit
Bus protocol
Modbus (RTU mode),
address range 0...247 selectable
address range 0...247 selectable
Signal filtering
0,3 s / 1 s / 10 s
Sensor protection
stainless steel, 1.4571, V4A, Ø = 6 mm,
nominal length (NL) = 50 mm
(other dimensions optional)
cable entry stamped (optional rolled)
nominal length (NL) = 50 mm
(other dimensions optional)
cable entry stamped (optional rolled)
Connection cable
silicone, SiHF, 2 x 0.25 mm², KL = 1.5 m
(other lengths and jacket materials, e.g. PTFE or glass fibre with steel mesh, available on request)
(other lengths and jacket materials, e.g. PTFE or glass fibre with steel mesh, available on request)
Housing
plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
Housing dimensions
72 x 64 x 37,8 mm (Tyr 1)
Cable gland
2x M 12 x 1.5 (Y-adapter); with strain relief,
exchangeable, max. inner diameter 6 mm
exchangeable, max. inner diameter 6 mm
Permissible air humidity
< 95 % RH, non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 65 (according to EN 60 529) humidity-tight stamped
IP 68 (optional watertight compound-filled) rolled
IP 54 (optional glass fibre cable)
IP 68 (optional watertight compound-filled) rolled
IP 54 (optional glass fibre cable)
Standards
CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU