- New
- Sale
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality
- Flow
- Modbus | Wireless Modbus
- Room controller
- EtherCAT P
- Accessory
Description
Room operating unit (controller)
RYMASKON® 1000 C Controller
The room control units of the RYMASKON® 1000 / 2000 / 3000 series are designed for control (up to 5 climate zones) in residential, hotel and office rooms and individually regulate the heating, cooling and fan levels of the internal rooms. The controller variants can be operated as stand-alone units thanks to the integrated control functions PI, PWM or 2-/3-point control. The product family is characterised by its elegant design, intuitive operation and the many possible combinations of the individual components.
The room control units RYMASKON® 1000 C (controller) are used to control and regulate heating convectors and fan coils. Depending on the type variant, the units are available with analogue outputs (0-10 V) and with Digital / relay outputs for controlling heating valves, cooling valves, 6-way valves, staged fans or EC fans.
The room control units RYMASKON® 1000 C (controller) are used to control and regulate heating convectors and fan coils. Depending on the type variant, the units are available with analogue outputs (0-10 V) and with Digital / relay outputs for controlling heating valves, cooling valves, 6-way valves, staged fans or EC fans.
Control takes place via PI, PWM or 2-point/3-point control. The change-over function can be used to operate 2-pipe and 4-pipe systems. The Modbus or W-Modbus communication interface enables the climate parameters on the controller to be changed and monitored via the BMS at any time. In addition, the sun protection (Venetian blinds, shutters) and light functions can be controlled via the bus. Visual indication takes place on a 2" TFT display, operation is via capacitive touch keys. In addition to the integrated temperature and humidity sensor, sensors for CO2 and VOC are available as an option. An input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are additionally available. This allows a window contact or a condensation control switch to be connected, for example. This provides all options for air-conditioning of the rooms according to individual requirements.
All unit types are available in the contemporary housing Iduna 3 (111 x 89 mm) in white or black colour. Wall-mounting is performed on standard in-wall flush boxes.
All unit types are available in the contemporary housing Iduna 3 (111 x 89 mm) in white or black colour. Wall-mounting is performed on standard in-wall flush boxes.
Technical details
Voltage supply
230 V AC (100-240 V AC)
Power consumption
typically < 3 W at 24 V DC; typically < 4.5 VA at 24 V AC
Measuring range, humidity
0...100 % RH
Deviation of humidity
typical ± 2.0 % (20…80 % RH); at + 25 °C, otherwise ± 3.0 %
Measuring range, temperature
0...+50 °C / +32...+122 °F
Data points
Temperature [°C] [°F], elative humidity [% RH], carbon dioxide (CO2) [ppm]
Temperature deviation
typically ± 0.5 K at +25 °C
Input
1x NTC10K, 1x digital
Ambient temperature
0...+50 °C (operation); –30...+70 °C (storage)
Electrical connection
0.2 - 1.5 mm², using push-in terminals
Housing dimensions
111 x 89 x 24 mm (Iduna 3) + 22 mm (in-wall)
Installation
Wall-mounting on in-wall flush box, Ø 55 mm,
(on-wall installation on request)
(on-wall installation on request)
Permissible air humidity
0...90 % RH (non-precipitating air)
Measuring range, CO2
0...2000 ppm
Protection type
IP 30 (according to EN 60 529)
Sensor, CO2
digital photoacoustic NDIR-CO2 sensor
(non-dispersive infra-red technology),
with automatic calibration and high long-term stability
(non-dispersive infra-red technology),
with automatic calibration and high long-term stability
Display
TFT display, 2" (41 x 30 mm), 320 x 240 x 3 pixels (RGB),
LED backlighting, viewing angle ± 85°
LED backlighting, viewing angle ± 85°
Measuring accuracy, CO2
typically ±50 ppm, ±3 % of the measured value at +25 °C
Function
Temperature, fan, sun protection and light (see type table)
Inputs
1 Input NTC10K
(can be configured as a digital input DI1, potential-free)
1 potential-operated switch (230 V AC)
(can be configured as a digital input DI1, potential-free)
1 potential-operated switch (230 V AC)
Output
relay outputs RO (230 V AC, max. 500 mA, cos = 1.0)
relay outputs RO (230 VAC, max. 3 A, cos = 1.0) as 2-point/3-point controllers
relay outputs RO (230 VAC, max. 3 A, cos = 1.0) as 2-point/3-point controllers
Operating elements
Capacitive keys (up to 10 keys, depending on type)
for setting the target temperature, fan stages, presence message, sensor values,
and for operating sun protection and light
for setting the target temperature, fan stages, presence message, sensor values,
and for operating sun protection and light
Setpoint capture
setpoint (temperature, fan, presence)
Communication
W-Modbus (Wireless)
Slave, address range 1...247, approx. 63 units,
BMS connection is radio-based via W-Modbus gateway
Slave, address range 1...247, approx. 63 units,
BMS connection is radio-based via W-Modbus gateway
Housing
Plastic, flame retardant (UL 94 V-0), PC/ABS material,
colour white (similar to RAL 9016) or black (similar to RAL 9004)
colour white (similar to RAL 9016) or black (similar to RAL 9004)
Standards
CE conformity,
2014/30/EU EMC Directive (EN 60730-1/2, EN 61000-6-1/3),
2001/95/EG Product safety (EN 60730-1),
2014/35/EU Low-Voltage Directive (EN 60730-1/2)
Radio Directive ETSI 300 328 V2.2.2
2014/30/EU EMC Directive (EN 60730-1/2, EN 61000-6-1/3),
2001/95/EG Product safety (EN 60730-1),
2014/35/EU Low-Voltage Directive (EN 60730-1/2)
Radio Directive ETSI 300 328 V2.2.2