Multi-funtional duct sensor
For humidity, temperature, pressure, differential pressure and volume flow for monitoring and controlling heating, ventilation and air-conditioning systemsPREMASGARD® 814x-Modbus
Für jede Anwendung die richtige Lösung [Translate]
The room radio sensors of the radio bus system KYMASGARD® 9000 are maintenance-free radio transmitters that function without batteries. Energy generation is effected by conversion of indoor room light into electric energy by means of a solar generator. If the ambient light is too low for power generation, the sensors can optionally be powered by two AAA batteries (not included). These sensors are used to detect the indoor climate and the setpoint values, and to transmit the recorded values to radio actuators and radio signal receivers/ gateways via radio signals. The following device configurations are available:
The room sensor KYMASGARD® RFTM-FSE is used to measure room temperature and room humidity.
The room control unit KYMASGARD® RFTM-FSE-ST is used to measure room temperature and humidity, and to display and set the setpoint for temperature. The setpoint is set directly on site using touch buttons.
The room sensor KYMASGARD® RFTM-LQ-FSE is used to measure room temperature, room humidity and air quality (VOC = Volatile Organic Compounds).
The room sensor KYMASGARD® RFTM-BW-FSE is used to measure room temperature, room humidity and the movement (or presence) of persons.
Optional accessories include the wall holder WH-3100 and the stand holder SH-3110, which enable them to be used as table-top units.
|Operating range, humidity||0...100 % r. H.|
|Deviation of humidity||
typical ± 2.0 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3.0 % r. H.
|Operating range, temperature||0...+40 °C|
|Temperature deviation||typically ± 0.2 K at +25 °C|
|Operating elements||The setpoint for temperature can be set and displayed on a touch panel.|
Energy generation by solar cell,
batteryless, maintenance-free (optionally battery-operated)
EnOcean protocol, modulation ASK, 868 MHz,
transmission power max. 10 mW, telegram type 4BS
1 temperature, 1 humidity, 1 setpoint,
1 air quality (VOC), 1 motion/presence
|Radio transmitter module||EnOcean Dolphin|
|Measurand acquisition||adjustable, every 1s/ 10 s/ 100 s|
adjustable, typically every 100 seconds,
or at any measuring value change,
status telegram approximately every 16 minutes
|Range of coverage||indoors typically 30 - 100 m, outdoors up to 300 m|
|Ambient temperature||–5...+55 °C|
|Storage temperature||–25...+60 °C|
plastic, material ABS,
colour pure white (similar to RAL 9010)
|Dimensions||Ø 88 mm, height 18 mm|
|Installation||Wall-mounted or free-standing using accessories|
|Permissible air humidity||0…90 % r.H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 30 (according to EN 60 529)|
CE conformity according to EMC directive 2014/ 30/ EU
and according to R&TTE directive 2014/ 53/ EU
sps smart production solutions – S+S Regeltechnik will be there 26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 26 to 28 November 2018.
THERMASGARD® TM65-Modbus -T3 - Calibratable immersion, screw-in or duct temperature measuring transducer
Patented high-quality product (patented immersion sensor, DE 10 2012 017 500.0) – basic device with...
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...