Efficient, convenient and network-enabled
Elegant appearance, touch-operated interface, large display, and Modbus-compatible
RYMaskon
The room radio sensors of the radio bus system KYMASGARD® 9000 are maintenance-free radio transmitters that function without batteries. Energy generation is effected by conversion of indoor room light into electric energy by means of a solar generator. If the ambient light is too low for power generation, the sensors can optionally be powered by two AAA batteries (not included). These sensors are used to detect the indoor climate and the setpoint values, and to transmit the recorded values to radio actuators and radio signal receivers ⁄ gateways via radio signals. The following device configurations are available:
The room sensor KYMASGARD® RFTM-FSE is used to measure room temperature and room humidity.
The room control unit KYMASGARD® RFTM-FSE-ST is used to measure room temperature and humidity, and to display and set the setpoint for temperature. The setpoint is set directly on site using touch buttons.
The room sensor KYMASGARD® RFTM-LQ-FSE is used to measure room temperature, room humidity and air quality (VOC = Volatile Organic Compounds).
The room sensor KYMASGARD® RFTM-BW-FSE is used to measure room temperature, room humidity and the movement (or presence) of persons.
Optional accessories include the wall holder WH-3100 and the stand holder SH-3110, which enable them to be used as table-top units.
Operating range, humidity | 0...100 % r. H. |
---|---|
Deviation of humidity |
typical ± 2.0 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3.0 % r. H. |
Operating range, temperature | 0...+40 °C |
Temperature deviation | typically ± 0.2 K at +25 °C |
Operation |
Energy generation by solar cell, batteryless, maintenance-free (optionally battery-operated) |
Radio technology |
EnOcean protocol, modulation ASK, 868 MHz, transmission power max. 10 mW, telegram type 4BS |
Channels |
1 temperature, 1 humidity, 1 setpoint, 1 air quality (VOC), 1 motion/presence
|
Radio transmitter module | EnOcean Dolphin |
Measurand acquisition | adjustable, every 1s ⁄ 10 s ⁄ 100 s |
Transmission interval |
adjustable, typically every 100 seconds, or at any measuring value change, status telegram approximately every 16 minutes |
Range of coverage | indoors typically 30 - 100 m, outdoors up to 300 m |
Ambient temperature | –5...+55 °C |
Storage temperature | –25...+60 °C |
Enclosure |
plastic, material ABS, colour pure white (similar to RAL 9010) |
Dimensions | Ø 88 mm, height 18 mm |
Installation | Wall-mounted or free-standing using accessories |
Permissible air humidity | 0…90 % r.H., non-precipitating air |
Protection class | III (according to EN 60 730) |
Protection type | IP 30 (according to EN 60 529) |
Standards |
CE conformity according to EMC directive 2014 ⁄ 30 ⁄ EU and according to R&TTE directive 2014 ⁄ 53 ⁄ EU |
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
more
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
more
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...
more
ISH | 11. - 15.03.2019 | Stand 10.3 A71
more