Efficient, convenient and network-enabled

Elegant appearance, touch-operated interface, large display, and Modbus-compatible


Satisfied customers drive our business

An overview of our references

Learn more

Good room climate is measurable!

Active and Modbus capable room sensors for temperature, humidity and CO2 now also for in-wall installation!


All quite relative

Pressure measuring transducer for gaseous and liquid media in cost-efficient Standard version for 0 to 16 bar


VOC in focus

Room and duct sensors for detection of mixed gases in cost-efficient Standard versions


Für jede Anwendung die richtige Lösung [Translate]



Item No. 1801-7454-0200-300
EAN 4 251325 617947

The switching actuator KYMASGARD® SA400 - FEM - AP is a device with four
potential-free channels for on-wall installation. Initiated by up to 30 radio transmitters (wall-mounted and hand-held transmitters, motion detectors, outdoor light sensors) and the auxiliary inputs, up to four different groups of electric consumers can be switched.

Each taught-in transmitter can be assigned a different function such as a sequential pushbutton function or a 10-minute switch-off delay. The repeater function can be additionally activated by means of a simple procedure.

279,40 € net
Operating mode
switching ON ⁄ OFF (long push of button),
pulse switch, stepping switch
Rated voltage 110 - 240 V, 50 / 60 Hz
Operating elements
2 buttons ("LRN" ⁄ "CLR")
2 LEDs ("LRN" ⁄ "CLR")
1 rotary switch with 16 positions
Channels 4 channels
Standby consumption 0.6 W
Load output ⁄ Connected load
normally open contact potential free
rated current: 16 A ⁄ 250 V AC
max. switch-on current: 130 A ⁄ 20 ms
max. switching capacity AC1: 4000 VA
max. switching capacity AC15: 750 VA
filament bulbs: 2000 W
halogen lamps 230 V AC: 2000 W
fluorescent lamps, uncompensated: 1000 W
fluorescent lamps, compensated: 750 W
fluorescent lamps, duo-connection: 1000 W
motor load 1Ph AC3 ⁄ 230 V AC: 1 kW
electronic ballast assuming 30 μF: 3 unit
capacitive load : 30 μF
Switching properties parametrisable
Ambient temperature –20...+40 °C (in operation)
Storage temperature –40...+85 °C
Connection 4mm2, via terminal screws
plastic, material ABS,
170 x 85 x 40 mm
Installation on-wall
Permissible air humidity 5…90 % r.H., non-precipitating air
Protection type IP 42 (according to EN 60 529)
Standards CE conformity, EN 090-2-2, EN 60669-2-1,
ROHS conformity according to directive 2011 ⁄ 65 ⁄ EU

S+S Regeltechnik - Benefits to the power of five

Learn more

S+S Regeltechnik News

Exhibition Newsshow all


ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019

Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...

Overview of all exhibition dates

Product Newsshow all


Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems

This bus capable and calibratable pressure measuring transducer enables the control of differential...


Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus

Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...

Exhibition News

ISH | 11. - 15.03.2019 | Stand 10.3 A71


Newsletter Subscription

Stay always informed about our products and news from S+S Regeltechnik