Für jede Anwendung die richtige Lösung [Translate]
The switching actuator KYMASGARD® SA100 - FEM - UP is a device with one channel for in-wall or on-wall installation and is used for switching electric consumers. Initiated by up to 30 radio transmitters (wall-mounted and hand-held transmitters, motion detectors, window contact) a group of electric consumers can be switched. Each taught-in transmitter can be assigned a different function such as a sequential pushbutton function or a 10-minute switch-off delay. The repeater function can be additionally activated by means of a simple procedure.
The switching actuator KYMASGARD® SA200 - FEM - UP is a device with two channels for in-wall or on-wall installation. Initiated by up to 30 radio transmitters (wall-mounted and hand-held transmitters, motion detectors, outdoor light sensors) and the two auxiliary inputs, two groups of electric consumers can be switched via its two outputs. Each taught-in transmitter can be assigned a different function such as a sequential pushbutton function or a 10-minute switch-off delay. The repeater function can be additionally activated by means of a simple procedure.
|Operating mode||switching ON/ OFF, pulse switch, stepping switch|
|Rated voltage||110 - 240 V, 50 / 60 Hz|
2 buttons ("LRN"/ "CLR"),
2 LEDs ("LRN"/ "CLR")
|Standby consumption||0.4 W|
|Load output ⁄ Connected load||
normally open contact
rated current: 6 A/ 240 V AC
max. switch-on current: 10 A
max. switching capacity AC1: 1500 VA
max. switching capacity AC15: 300 VA
filament bulbs: 750 W
halogen lamps 230 V AC: 500 W
fluorescent lamps, uncompensated: 300 W
fluorescent lamps, compensated: 200 W
fluorescent lamps, duo-connection: 300 W
motor load 1Ph AC3/ 230 V AC: 0.185 kW
electronic ballast assuming 30 μF: 1 unit
capacitive load : 10 μF
|Ambient temperature||–20...+40 °C (in operation)|
|Storage temperature||–40...+85 °C|
|Connection||4mm2, via terminal screws|
plastic, material PC,
Ø 51 mm, height 25 mm
|Permissible air humidity||5…90 % r.H., non-precipitating air|
|Protection type||IP 20 (according to EN 60 529)|
CE conformity, EN 090-2-2, EN 60669-2-1,
ROHS conformity according to directive 2011/ 65/ EU
sps smart production solutions – S+S Regeltechnik will be there 26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 26 to 28 November 2018.
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...
PREMASGARD® 814x-Modbus - Multi-funtional duct sensor
This bus capable and calibratable pressure measuring transducer enables the control of differential...