Für jede Anwendung die richtige Lösung [Translate]
The dimmer actuator KYMASGARD® DA100- FEM - UP is a device with one channel for in-wall or on-wall installation. Initiated by up to 30 radio transmitters (wall-mounted and hand-held transmitters) a group of ohmic and inductive consumers can be switched and dimmed. Different functions such as crossfade time or time delay can be allocated to the output, depending on the parameter setting. The dimmer actuator DA1- FEM - UP can easily be reconfigured for use as a repeater.
switching ON/ OFF,
dimming lighter/ darker
|Rated voltage||110 - 240 V, 50 / 60 Hz|
2 buttons ("LRN"/ "CLR"),
2 LEDs ("LRN"/ "CLR")
|Standby consumption||0.6 W|
|Load output ⁄ Connected load||
MOSFET, not potential-free
rated current: 6 A/ 250 V AC
max. switching capacity AC1: 300 VA
max. switching capacity AC15: 150 VA
Ohmic load (filament bulbs) : 300 W
inductive load (cos ϕ ≥ 0.8) : 200 VA
halogen lamps 230 V AC with extra-low
voltage transformers for phase leading
and trailing edge control: 200 W
|Ambient temperature||–20...+40 °C (in operation)|
|Storage temperature||–40...+85 °C|
|Connection||4mm2, via terminal screws|
plastic, material PC,
Ø 51 mm, height 25 mm
|Permissible air humidity||5…90 % r.H., non-precipitating air|
|Protection type||IP 20 (according to EN 60 529)|
CE conformity, EN 090-2-2, EN 60669-2-1,
ROHS conformity according to directive 2011/ 65/ EU
sps smart production solutions – S+S Regeltechnik will be there 26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 26 to 28 November 2018.
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...
PREMASGARD® 814x-Modbus - Multi-funtional duct sensor
This bus capable and calibratable pressure measuring transducer enables the control of differential...