ATF01 NITK

THERMASGARD® ATF01 NITK

Item No. 1101-1031-0001-000
EAN 4 251325 600215

Outside wall resistance thermometer/ weather sensor THERMASGARD® ATF 1 (Internal sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws.

Outside wall resistance thermometer/ weather sensor THERMASGARD® ATF 01 (Internal sensor) with passive output, with housing made of impact-resistant plastic and snap-on lid.

It is used to measure outside temperatures, temperatures in wet rooms e.g. as an outdoor sensor, weather sensor for installation on outside walls, in cold storage buildings and greenhouses, in halls, in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In case of direct solar radiation, the sunshade protector WS 01 should be used.

18,30 € net
Sensor Ni1000Tk5000 (TCR=5000ppm/K)
Connection type 2-wire connection
Testing current < 0.3 mA
Measuring range –50...+90 °C
Insulating resistance ≥ 100 MΩ,
at +20 °C (500V DC)
Electrical connection 0.14 - 1.5 mm²
via terminal screws on circuit board
Housing plastic, UV-stabilised,
material polyamide, 30 % glass-globe-reinforced
colour traffic white (similar to RAL 9016)
ALTF 02 with snap-on lid,
Housing dimensions 72 x 64 x 37.8 mm (Tyr 01)
Cable gland M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
Permissible air humidity < 95 % r. H., non-precipitating air
Protection class III (according to EN 60 730)
Protection type IP 43 (according to EN 60 529)