Immersion temperature sensor THERMASGARD® TF43 NTC10K 200mm

Sensor

Protection type

Inserted length

output model

Item no. 1101-7011-5041-000

EAN 4251325606491

Product group: WG03B

Immersion temperature sensor THERMASGARD® TF 43

The THERMASGARD® TF 43 temperature measuring transducer is a resistance thermometre with passive output. It features an housing made of impact resistant plastic with a snap-on cover and a straight protective tube.

The THERMASGARD® TF 65 temperature measuring transducer is a resistance thermometre with passive output. It features an housing made of impact resistant plastic with quick-locking screws and a straight protective tube. Patent No.DE 10 2012 017 500.0

These built-in temperature / immersion temperature sensor devices are electrical contact thermometres for fluid and gas temperature measuring. Use stainless steel thermowells for aggressive media. They are used e.g. in piping, heating, container and storage systems, in compact district heating stations, in warm and cold water as well as oil and lubrication cycle systems, in mechanical equipment and plant engineering and in the entire industry sector.

Data points

température [°C]

Operating mode

2-wire connection
(4-wire connection for PT100 / PT1000A, optional for other sensors)

Sensor

NTC10kOhm

Connection type

2-wire connection

Testing current

< 2.0 mW

Measuring range

–30...+150 °C

Ambient temperature

–20...+100 °C

Insulating resistance

100 MΩ,
at +20 °C (500V DC)

Protective tube

stainless steel, 1.4571, V4A, Ø = 6 mm

Electrical connection

0.14 - 1.5 mm²
via terminal screws on circuit board

Cable connection

cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)

Housing

plastic, UV-stabilised,
material polyamide, 30 % glass-globe-reinforced
colour traffic white (similar to RAL 9016)
ALTF 02 with snap-on lid,

Housing dimensions

72 x 64 x 37.8 mm (Tyr 01)

Cable gland

M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm

Permissible air humidity

< 95 % RH, non-precipitating air

Protection class

III (according to EN 60 730)

Protection type

IP 43 (according to EN 60 529)