HFTM-SD-I

THERMASGARD® HFTM-SD-I

Item No. 1101-6162-0219-920
EAN 4 251325 615752

Calibratable temperature measuring transducer with sleeve sensor THERMASGARD® HFTM with  eight switchable measuring ranges, continuous output, with or without optional display, housing made of impact-resistant plastic with quick-locking screws. The temperature transmitter with remote sensor is used for temperature detection in liquid and gaseous media, e.g. by installation inside an immersion sleeve, or as duct sensor. Direct and permanent use in liquids is possible in combination with THE immersion sleeves (see last chapter). The sensor is factory-calibrated; an environmental precision adjustment by an expert is possible.

69,91 € net
Power consumption < 1,0 VA/ 24 V DC
< 2,2 VA/ 24 V AC
Deviation of humidity typically ± 0.2 K at +25 °C
Sensor Pt1000, DIN EN 60751, class B
Connection type 2- or 3-wire connection
Measuring ranges multi-range switching with 8 switchable measuring ranges,
see table (other ranges optional)
with manual zero point correction (± 10 K)
Ambient temperature Measuring transducer –30...+70 °C
Protective tube (sensor sleeve) stainless steel, 1.4571, V4A, Ø = 6 mm,
nominal length (NL) = 50 mm
(other dimensions optional)
cable entry stamped (optional rolled)
Electrical connection 0.14 - 1.5 mm²
via terminal screws on circuit board
Cable connection cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
Housing plastic, UV-stabilised,
material polyamide, 30 % glass-globe-reinforced
colour traffic white (similar to RAL 9016)
ALTF 02 with snap-on lid,
Housing dimensions 72 x 64 x 37.8 mm (Tyr 01)
Cable gland M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
Connection cable silicone, SiHF, 2 x 0.25 mm², KL = 1.5 m (other lengths and
range limits optional, e.g. PTFE leads up to +250 °C
or glass fibre with steel wire mesh up to +350°C)
Permissible air humidity < 95 % r. H., non-precipitating air
Protection class III (according to EN 60 730)
Protection type IP 43 (according to EN 60 529)
Standards CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU