PREMASREG 7161-U-W LCD

PREMASREG 7161-U-W LCD

Item No. 1302-7161-4161-200
EAN 4 251325 612850

The electronic PREMASREG® 716x pressure sensor and switch is equipped with measuring functions for volume flow, differential pressure, filter monitoring and liquid level detection based on pressure measurement in clean air. The devices with a housing made from impact-resistant plastic or stainless steel V4A, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional) are fitted with one switching output, one continuous output and one backlit display for setting the switching point and displaying the ACTUAL values. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

This pressure sensor is used in clean room, medical and filter technology, in ventilation and air conditioning ducts, in spray booths, in large-scale catering facilities, for filter monitoring and level measurement or for triggering frequency converters. The medium measured is air (non-precipitating), or other gaseous, non-aggressive, non-combustible media.

It has a manual zero point pushbutton and an offset potentiometer for final value correction. Parameter entry is menu-based and is easy to perform using three buttons with the help of the display. A connection set ASD-06 (2 m connection hose, two pressure nipples, screws) is included in the scope of supply.

240,47 € net
Voltage supply 24 V AC/ DC (± 10 %) and 15...36 V DC
Power consumption < 1.5 VA/ 24 V DC, < 2.8 VA/ 24 V AC
Load resistance RL > 5 kOhm
Output signal 0 -10 V
1 changeover contact (24 V), 1 A ohmic load
Connection type 3-wire connection
Measuring function Volume flow, differential pressure,
filter monitoring, fill level
(adjustable)
Measuring ranges 10...100% (adjustable)
Media temperature –20...+50 °C
Pressure connection 4/ 6 x 11 mm (hoses Ø = 4/ 6 mm),
metal pressure connection nozzles
Type of pressure differential pressure
Accuracy (1000 Pa): typically ± 5 Pa
compared to the calibrated reference device
Above- ⁄ below-pressure max. ± 10000 Pa
Medium clean air and
non-aggressive, non-combustible gases
Signal filtering switchable 1 s/ 10 s
and small value suppression < 1 %
Signal hysteresis ± 1 % or final value (pressure) 10 Pa/ 50 Pa
Electrical connection 3-wire connection
0.14 - 1.5 mm², via plug-in screw terminal
Cable connection cable gland, plastic (M 16 x 1.5; with strain relief,
exchangeable, max. inner diameter 10.4 mm) or
M12 connector (male, 5-pin, A-code)
according to DIN EN 61076-2-101 (optional on request)
Housing plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016),
housing cover for display is transparent !
Cable gland M 20 x 1.5; including strain relief
Dimensions 126 x 90 x 50 mm (Tyr 2)
Sum of Linearity+hysteresis < ± 1 % of final value
Temperature drift values ± 0.1 %/ °C
Air humidity < 95 % r. H., non-precipitating air
Protection class III (according to EN 60 730)
Protection type IP 65 (according to EN 60 529)
Standards CE conformity,
according to EMC directive 2014/ 30/ EU,
according to EN 61326-1, according to EN 61326-2-3
Features Display with illumination, three-line,
cutout approx. 70 x 40 mm (W x H),
for displaying the volume flow, differential pressure,
contamination degree
or level
and for setting the switchpoint, K factor, measuring range limits
and other settings
K factor 1 to 3000 (adjustable)
Units m³/ s, m³/ min, m³/ h, l/ s, l/ min, l/ h, %, cm (adjustable)
Max. value displayed 999999