Item No. 1201-7122-0400-100
EAN 4 251325 611402

The calibratable pendulum room humidity and temperature sensor HYGRASGARD® RPFF - 25/ RPFTF - 25 with pluggable metal sinter filter, housing made of impact-resistant plastic, with/ without optional display. It measures the relative humidity and/ or the temperature of the air and converts the measurands into a standard signal of 0 - 10 V or 4...20 mA. It is equipped with four switchable temperature ranges. The sensor is applied in non-aggressive dust-free atmospheres in refrigeration, air conditioning, ventilation and clean room technology, hotels, technical rooms, meeting rooms and convention centres. These measuring transducers are designed for exact detection of temperature and humidity. A digital long-term stable sensor is used as measuring element for humidity and temperature measurement. The sensor is appropriate for ceiling and duct installation, or for integrating it into equipment. The sensor is factory-calibrated; an environmental precision adjustment by an expert is possible.

400,75 € net
Voltage supply 15...36 V DC
depending on working resistance, residual ripple stabilised ± 0.3 V
Power consumption < 1.1 VA/ 24 V DC ; < 2.2 VA/ 24 V AC
Working resistance Ra (ohm) = (Ub -14 V)/ 0.02 A for I variant
Sensors digital humidity sensor
with integrated temperature sensor,

low hysteresis, high long-term stability
Measuring range, humidity 0...100 % r. H.
(output corresponding to 4...20 mA)
Operating range, humidity 0...95 % r. H. (without dew formation)
Deviation of humidity typical ± 1,8 % r. H. (10…90 % r. H. ); at + 25 °C, otherwise ± 2 %
Output, humidity 4...20 mA
Sensor protection pluggable measuring head (probe) with
metal sinter filter, Ø 16 mm, L = 88.5 mm, exchangeable
Ambient temperature storage –35...+85 °C
operation –30...+70 °C
Protective tube stainless steel V2A (1.4301), Ø = 18 mm (16 mm), L = 120 mm
Electrical connection 2-, 3- or 4-wire connection
0.14 -1.5 mm ² via terminal screws on circuit board
Cable connection cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
Housing plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016),
housing cover for display is transparent !
Housing dimensions 126 x 90 x 50 mm (Tyr 2)
Cable gland M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
Connection cable KL = 2 m
Long-term stability ± 1 %/ year
Protection class III (according to EN 60 730)
Protection type IP 65 (according to EN 60 529)
Standards CE conformity,
according to EMC directive 2014/ 30/ EU,
according to EN 61326-1, according to EN 61326-2-3
Display three-line display with illumination, cutout 70 x 40 mm (W x H),
for displaying ACTUAL temperature and/ or ACTUAL humidity
Type Item No. Price
MF-16-K Mounting flange, plastic 7100-0030-0000-000 8,26 €