Item No. 1701-3022-0000-000
EAN 4 251325 613772

The electronic airflow monitor RHEASGARD® KLGF measures the flow velocity in m/ s and converts the measurement signal to a standard signal of 0 - 10 V (relative) (flow measuring transducer). The flow sensor available with/ without an optional display.

The RHEASREG® KLSW provided with a switching output (one-step or two-step) is designed as flow sensor/ flow monitor. Fine adjustment of the measuring range end value by the user is possible with the help of a potentiometer.

The airflow monitor/ airflow sensor is used for monitoring or controlling airflows in ducts, at ventilators and dampers, for flow-dependent monitoring of humidifiers and electric heating registers according to DIN 57100, part 420, or for use in connection with DDC systems.

217,97 € net
Voltage supply 24 V AC/ DC
Operating range 0.1…15 m/ s (adjustable)
Sensitivity 0.1...5 m/ s
Output 1 or 2 potential-free relays (changeover contacts)
8 A, max. 2 kW or 0 - 10 V (relative, linearised on request)
Measuring range 0.1...15 m/ s
Ambient temperature 0...+60 °C at the device; 0...+80 °C medium
Medium pollutant-free, non-precipitating air
Switching hysteresis 2% (non-adjustable)
Start bridging approx. 15...120 s (adjustable)
Switch-off delay approx. 2 ...20 s (adjustable)
Process connection by mounting flange
(included in the scope of delivery)
Max. sensor cable length 50 m, avoid laying parallel with mains voltage-carrying lines,
or use shielded cables, minimum cross section 1.5 mm2
per conductor, apply cable screen one-sided
Protective tube metal (brass, nickel-plated), Ø 10 mm,
nominal length NL = 140 mm
Sensor sensor breakage protection, temperature-compensated
Electrical connection 0.14 - 1.5 mm²
via terminal screws on circuit board
Housing plastic, UV-stabilised,
material polyamide, 30 % glass-globe-reinforced,
colour traffic white (similar to RAL 9016)
Cable gland M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
Dimensions 108 x 70 x 73,5 mm (Thor 2)
Protection class III (according to EN 60 730) at UB = 24 V
Protection type IP 65 (according to EN 60 529)
Standards CE conformity,
EMC directive 2014/ 30/ EU,
low-voltage directive 2014/ 35/ EU