Efficient, convenient and network-enabled
Elegant appearance, touch-operated interface, large display, and Modbus-compatible
RYMaskon
Patentiertes Qualitätsprodukt (Patent-Nr. DE 10 2014 010 719.1)
Der wartungsfreie mikroprozessorgesteuerte AERASGARD® KFTM - LQ - CO2 - Modbus bzw. KCO2 - Modbus ⁄ KLQ - CO2 - Modbus mit Modbus-Anschluss, wahlweise mit ⁄ ohne Display, ist zur Kanalmontage und dient zur Erfassung aller für ein Raumklima relevanten Messgrößen. Hierzu werden die Messgrößen Luftfeuchtigkeit, Temperatur, CO2 Konzentration sowie Luftqualität (VOC) gemessen. Durch Erfassung aller vier Messgrößen in einem Gerät kann das gesamte Raumklima effektiv überwacht und gesteuert werden. Er misst CO2 im Bereich von 0...5000 ppm, VOC in einer von drei wählbaren Sensibilitätsstufen LOW / MEDIUM / HIGH, Temperaturen im Bereich von –35...+80 °C sowie die relative Luftfeuchtigkeit von 0...100 % r.H.
Die relative Feuchte (% r.H.) ist der Quotient aus dem Wasserdampfpartialdruck und dem Sättigungsdampfdruck bei der jeweiligen Gastemperatur. Ein digitaler, langzeitstabiler Sensor als Messelement für relative Luftfeuchte und Temperatur garantiert exakte Messergebnisse.
Der CO2Gehalt der Luft wird mittels optischen NDIR-Sensors (nicht-dispersive Infrarot-Technologie) ermittelt. Der Erfassungsbereich der Sensoren wird auf Standardanwendungen wie z. B. Wohn und Tagungsraum überwachung kalibriert. Bedarfsgerechte Lüftung, Steigerung des Wohlbefindens und des Kundennutzens, erhöhter Komfort sowie eine Senkung der Betriebskosten durch Energieeinsparung sind nur einige Ergebnisse des Einsatzes des AERASGARD® CO2.
Obige Ausführungen zeigen, dass es Anwendungen für CO2-Messungen, Anwendungen für VOC-Messungen aber aus unserer Sicht vorrangig Anwendungen für die Kombination bei der Messgrößen gibt. Wichtig hierbei ist, dass sich diese beiden Messgrößen nicht ineinander umrechnen bzw. Ableitungen zueinander herstellen lassen. Ein NDIR-CO2 Messgerät misst selektiv kann keine VOCs detektieren, ein VOC-Mischgassensor kann keine CO2 Moleküle erfassen.
Voltage supply | 24 V AC ⁄ DC (± 10 %) |
---|---|
Power consumption |
< 4.4 W ⁄ 24 V DC typical; < 6.4 VA ⁄ 24 V AC typical; peak current 200 mA |
Data points |
temperature, relative humidity, air quality (VOC), carbon dioxide (CO2), atmospheric pressure |
Sensor, VOC |
VOC sensor (metal oxide) with automatic calibration (VOC = volatile organic compounds) |
Measuring range, VOC |
0...100 % air quality; referred to calibrating gas; multi-range switching (selectable via DIP switches) VOC sensitivity low, medium, high |
Measuring accuracy, VOC | ± 20 % of final value (referred to calibrating gas) |
Service life | > 60 months (under normal load conditions) |
Measuring range, CO2 | 0...5000 ppm |
Sensor, CO2 |
optical NDIR sensor (non-dispersive infra-red technology) including atmospheric pressure compensation (up to 1100 mbar) with automatic and manual calibration |
Measuring accuracy, CO2 | typically ± 30 ppm ± 3 % of measured value |
Temperature dependence, CO2 |
± 5 ppm ⁄ °C or ± 0.5 % of measured value ⁄ °C (whichever is higher) |
Pressure dependence | ± 0,13 % ⁄ mm Hg |
Gas exchange | by diffusion |
Response time | < 2 minutes |
Ambient temperature | –10...+60 °C |
Bus protocol |
Modbus (RTU mode), address range 0...247 selectable |
Signal filtering | 4 s / 32 s |
Process connection |
by mounting flange, plastic (included in the scope of delivery) |
Protective tube |
PLEUROFORMTM, material polyamide (PA6), with torsion protection, Ø 20 mm, vmax = 30 m/s (air) without filter: NL = 202.5 mm / with plastic filter: NL = 235 mm (optional with metal filter: NL = 227 mm) |
Electrical connection | 0.14 - 1.5 mm2, via push-in terminal |
Enclosure |
plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted ⁄ Phillips head - combination), colour traffic white (similar to RAL 9016), enclosure cover for display is transparent ! |
Enclosure dimensions | 126 x 90 x 50 mm (Tyr 2) |
Cable gland | 2x M 16 x 1.5; including strain relief, exchangeable |
Long-term stability | < 2 % in 15 years |
Protection class | III (according to EN 60 730) |
Protection type | IP 65 (according to EN 60 529) enclosure only! (PLEUROFORM IP 30) |
Standards |
CE-Konformitat, elektromagnetische |
Display |
three-line display with illumination, cutout approx. 70 x 40 mm (W x H), for displaying actual humidity, actual temperature, air quality and / or the actual CO2 content |
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
more
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
more
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...
more
ISH | 11. - 15.03.2019 | Stand 10.3 A71
more