Construction progress of the Giga factory for sensor technology

The structural work on the production halls and offices at our new location in Nuremberg, Germany is nearing completion. Construction is progressing according to plan, so we are well positioned for the future and the increasing demand for our sensors.

Watch the video

Groundbreaking ceremony for significant growth

The office and manufacturing space alone at the new S+S location in Nuremberg will be expanded to 8,600 m² in order to meet the increasing demand for advanced sensor devices.

Watch the video

With Giga factory for sensors to become the #1 on the market

On a total area of over 14000 square meters, the new S+S company headquarters is being built in the north of Nuremberg.

Watch the video

Specialists in pressure

Multi-range measuring transducers for pressure, differential pressure and volume flow

PREMASGARD 211x / 212x

Efficient, convenient and network-enabled

Elegant appearance, touch-operated interface, large display, and Modbus-compatible

RYMaskon

Multi-funtional duct sensor

For humidity, temperature, pressure, differential pressure and volume flow for monitoring and controlling heating, ventilation and air-conditioning systems

PREMASGARD® 814x-Modbus

Satisfied customers drive our business

An overview of our references

Learn more

Electronic frost protection monitor

2-phase thermostat with continuous and switching output for reliable prevention of frost damages and freezing

THERMASREG® FS-20

Für jede Anwendung die richtige Lösung [Translate]

TM65-Modbus-T3 300mm

THERMASGARD® TM65-Modbus-T3 300mm

Item No. 1101-7236-0060-000
EAN 4 251325 617664

Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0)

Calibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3 with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with/ without display, stainless steel-protective tube (50–400 mm).

The duct sensor is used to detect the temperature in liquid or gaseous media. Use the stainless steel immersion sleeves for aggressive media. It is used in heating engineering, ventilation and air conditioning ducts, pipes, storage systems, compact district heating stations, warm and cold water systems, oil and lubrication cycle systems, machine and systems engineering and the entire industry sector.

Innovative Modbus sensor with galvanically separated RS485 Modbus interface, selectable bus termination resistance, DIP switch for setting the bus parameters and bus address in current-free state, LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, with customised programming in the 7-segment range and dot-matrix range). Uses internal diagnostics to detect sensor breakage or sensor short circuit as errors. The error messages can be retrieved via Modbus and are shown on the display. The sensor is factory-calibrated; an environmental precision adjustment by an expert is possible.

112,35 € net
Voltage supply 24 V AC (± 20 %) and
15…36 V DC
Power consumption < 1.2 W/ 24 V DC; < 1.8 VA/ 24 V AC
Temperature deviation typically ± 0.2 K at +25 °C
Sensor Pt1000, DIN EN 60751, class B
(Perfect Sensor Protection)
Measuring range –50...+150 °C
Zero point offset ± 10 °C
Ambient temperature Measuring transducer –30...+70 °C
Medium depending on selected immersion sleeve
Error detection sensor breakage, sensor short circuit
Bus protocol Modbus (RTU mode),
address range 0...247 selectable
Signal filtering 0,3 s / 1 s / 10 s
Protective tube stainless steel, 1.4571, V4A, Ø = 6 mm
Electrical connection 0.2 - 1.5 mm2, via push-in terminal
Cable connection cable gland, plastic
(2x M 20 x 1.5; with strain relief, exchangeable,
inner diameter 8 - 13 mm) or
M12 connector according to DIN EN 61076-2-101
(optional on request)
Housing plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
Housing dimensions 108 x 78.5 x 43.3 mm (Tyr 3 without display)
Cable gland 2x M 20 x 1.5; with strain relief, exchangeable,
inner diameter 8 - 13 mm
Permissible air humidity < 95 % r. H., non-precipitating air
Protection class III (according to EN 60 730)
Protection type IP 65 (according to EN 60 529)
Standards CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
Features Display with illumination, three-line, programmable,
cutout approx. 51 x 29 mm (W x H),
for displaying the actual temperature or
an individually programmable display value
Internal diagnostics Error 1 at sensor breakage
Error 2 at sensor short circuit
Type Item No. Price
MF-15-K Mounting flange, plastic 7100-0032-0000-000 5,29 €

S+S Regeltechnik - Benefits to the power of five

Learn more

S+S Regeltechnik News

Exhibition Newsshow all

 

Light + Building 2020 – S+S Regeltechnik will be there
27.09. - 02.10.2020

Hall 9.1 | Booth A84
Be our guest at the world's leading trade fair for light, design and intelligent...
more

Overview of all exhibition dates

Product Newsshow all

 

HYGRASREG® TW ⁄ KW ⁄ KW-SD - Dew point and condensation control switches

These typical high-quality products from S+S feature innovative measuring, enclosure and connection...
more

 

THERMASGARD® TM65-Modbus -T3 - Calibratable immersion, screw-in or duct temperature measuring transducer

Patented high-quality product (patented immersion sensor, DE 10 2012 017 500.0) – basic device with...
more

Exhibition News

Light + Building 2020 | Frankfurt am Main | 27.09. - 02.10.2020

more

Newsletter Subscription

Stay always informed about our products and news from S+S Regeltechnik