Construction progress of the Giga factory for sensor technology
The structural work on the production halls and offices at our new location in Nuremberg, Germany is nearing completion. Construction is progressing according to plan, so we are well positioned for the future and the increasing demand for our sensors.
Watch the videoGroundbreaking ceremony for significant growth
The office and manufacturing space alone at the new S+S location in Nuremberg will be expanded to 8,600 m² in order to meet the increasing demand for advanced sensor devices.
Watch the videoWith Giga factory for sensors to become the #1 on the market
On a total area of over 14000 square meters, the new S+S company headquarters is being built in the north of Nuremberg.
Watch the videoProducts especially for industry
Industrial Design
Specialists in pressure
Multi-range measuring transducers for pressure, differential pressure and volume flow
PREMASGARD 211x / 212xEfficient, convenient and network-enabled
Elegant appearance, touch-operated interface, large display, and Modbus-compatible
RYMaskon
Multi-funtional duct sensor
For humidity, temperature, pressure, differential pressure and volume flow for monitoring and controlling heating, ventilation and air-conditioning systems
PREMASGARD® 814x-Modbus
One basic device in multiple versions
Calibratable immersion, screw-in or duct temperature measuring transducer
THERMASGARD® TM65-Modbus-T3
Electronic frost protection monitor
2-phase thermostat with continuous and switching output for reliable prevention of frost damages and freezing
THERMASREG® FS-20
Für jede Anwendung die richtige Lösung [Translate]
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0)
Calibratable temperature measuring transducer with sensor tube THERMASGARD®
TM 65 - Modbus - T3 with Modbus connection, in an impact-resistant plastic housing
with quick-locking screws, optionally with/ without display, stainless steel-protective
tube (50–400 mm).
The duct sensor is used to detect the temperature in liquid or gaseous media. Use
the stainless steel immersion sleeves for aggressive media. It is used in heating
engineering, ventilation and air conditioning ducts, pipes, storage systems, compact
district heating stations, warm and cold water systems, oil and lubrication cycle
systems, machine and systems engineering and the entire industry sector.
Innovative Modbus sensor with galvanically separated RS485 Modbus interface, selectable
bus termination resistance, DIP switch for setting the bus parameters and bus address in
current-free state, LEDs for telegram status display, two separate push-in terminals and
large three-line display (illuminated, with customised programming in the 7-segment range
and dot-matrix range). Uses internal diagnostics to detect sensor breakage or sensor short
circuit as errors. The error messages can be retrieved via Modbus and are shown on the
display. The sensor is factory-calibrated; an environmental precision adjustment by an expert
is possible.
| Voltage supply |
24 V AC (± 20 %) and 15…36 V DC |
|---|---|
| Power consumption | < 1.2 W/ 24 V DC; < 1.8 VA/ 24 V AC |
| Temperature deviation | typically ± 0.2 K at +25 °C |
| Sensor |
Pt1000, DIN EN 60751, class B (Perfect Sensor Protection) |
| Measuring range | –50...+150 °C |
| Zero point offset | ± 10 °C |
| Ambient temperature | Measuring transducer –30...+70 °C |
| Medium | depending on selected immersion sleeve |
| Error detection | sensor breakage, sensor short circuit |
| Bus protocol |
Modbus (RTU mode), address range 0...247 selectable |
| Signal filtering | 0,3 s / 1 s / 10 s |
| Protective tube | stainless steel, 1.4571, V4A, Ø = 6 mm |
| Electrical connection | 0.2 - 1.5 mm2, via push-in terminal |
| Cable connection |
cable gland, plastic
(2x M 20 x 1.5; with strain relief, exchangeable, inner diameter 8 - 13 mm) or M12 connector according to DIN EN 61076-2-101 (optional on request) |
| Housing |
plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted/ Phillips head - combination), colour traffic white (similar to RAL 9016) |
| Housing dimensions | 108 x 78.5 x 43.3 mm (Tyr 3 without display) |
| Cable gland |
2x M 20 x 1.5; with strain relief, exchangeable, inner diameter 8 - 13 mm |
| Permissible air humidity | < 95 % r. H., non-precipitating air |
| Protection class | III (according to EN 60 730) |
| Protection type | IP 65 (according to EN 60 529) |
| Standards |
CE conformity, electromagnetic compatibility according to EN 61326, according to EMC Directive 2014/ 30/ EU |
| Features |
Display with illumination, three-line, programmable,
cutout approx. 51 x 29 mm (W x H), for displaying the actual temperature or an individually programmable display value |
| Internal diagnostics |
Error 1 at sensor breakage
Error 2 at sensor short circuit |
| Type | Item No. | Price | |||
|---|---|---|---|---|---|
| MF-15-K | Mounting flange, plastic | 7100-0032-0000-000 | 5,29 € |
Light + Building 2020 – S+S Regeltechnik will be there
27.09. - 02.10.2020
Hall 9.1 | Booth A84
Be our guest at the world's leading trade fair for light, design and intelligent...
more
HYGRASREG® TW ⁄ KW ⁄ KW-SD - Dew point and condensation control switches
These typical high-quality products from S+S feature innovative measuring, enclosure and connection...
more
THERMASGARD® TM65-Modbus -T3 - Calibratable immersion, screw-in or duct temperature measuring transducer
Patented high-quality product (patented immersion sensor, DE 10 2012 017 500.0) – basic device with...
more
Light + Building 2020 | Frankfurt am Main | 27.09. - 02.10.2020
more
