Multi-funtional duct sensor
For humidity, temperature, pressure, differential pressure and volume flow for monitoring and controlling heating, ventilation and air-conditioning systemsPREMASGARD® 814x-Modbus
Für jede Anwendung die richtige Lösung [Translate]
Calibratable tube contact temperature measuring transducers with detached sensor head and strap THERMASGARD®ALTM 2 - Modbus - T3 with Modbus connection, housing made from impact-resistant plastic with quick-locking screws, with/ without optional display for displaying actual temperature.
The surface contact sensor is used for temperature detection on piping, tubes (e.g. cold- and hot-water) or on heating sections for heating system control. The tube sensors are factory-calibrated. Adjustment/ fine adjustment by the user is possible (zero point offset is adjustable).
24 V AC (± 20 %) and
15…36 V DC
|Power consumption||< 2 W/ 24 V DC, < 3.5 VA/ 24 V AC|
|Temperature deviation||typically ± 0.2 K at +25 °C|
Pt1000, DIN EN 60751, class B
(Perfect Sensor Protection)
Tmax up to +100 °C
|Zero point offset||± 10 °C|
|Ambient temperature||Measuring transducer –30...+70 °C|
clean air and
non-aggressive, non-combustible gases
|Error detection||sensor breakage, sensor short circuit|
Modbus (RTU mode),
address range 0...247 selectable
|Signal filtering||0,3 s / 1 s / 10 s|
endless metal strap and metal tightener
(included in scope of delivery)
|Strap dimensions||Ø = 13 - 92 mm (¼ - 3"), L = 300 mm|
|Electrical connection||0.2 - 1.5 mm2, via push-in terminal|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016),
housing cover for display is transparent !
|Housing dimensions||108 x 78.5 x 45.8 mm (Tyr 3 with display)|
2x M 20 x 1.5; with strain relief, exchangeable,
inner diameter 8 - 13 mm
|Protection class||III (according to EN 60 730)|
IP 65 (according to EN 60 529) humidity-tight stamped
IP 68 (optional watertight compound-filled) rolled
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
Display with illumination, three-line, programmable,
cutout approx. 51 x 29 mm (W x H),
for displaying the actual temperature or
an individually programmable display value (The Modbus
interface allows the display to be individually configured in the
7-segment area and in the dot-matrix area.)
sps smart production solutions – S+S Regeltechnik will be there 26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 26 to 28 November 2018.
THERMASGARD® TM65-Modbus -T3 - Calibratable immersion, screw-in or duct temperature measuring transducer
Patented high-quality product (patented immersion sensor, DE 10 2012 017 500.0) – basic device with...
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...