Efficient, convenient and network-enabled
Elegant appearance, touch-operated interface, large display, and Modbus-compatible
RYMaskon
Calibratable temperature measuring transducer with sleeve sensor THERMASGARD® HFTM - Modbus - T3 with Modbus connection, enclosure made from impact-resistant plastic with quick-locking screws, with ⁄ without optional display for displaying the actual temperature.
The temperature transmitter with remote sensor is used for temperature detection in liquid and gaseous media e.g. by installation inside an immersion sleeve or as a duct sensor. The sensors are factory-calibrated. Adjustment ⁄ fine adjustment by the user is possible (zero point offset is adjustable).
Voltage supply |
24 V AC (± 20 %) and 15…36 V DC |
---|---|
Power consumption | < 2 W ⁄ 24 V DC, < 3.5 VA ⁄ 24 V AC |
Temperature deviation | typically ± 0.2 K at +25 °C |
Sensor |
Pt1000, DIN EN 60751, class B (Perfect Sensor Protection) |
Measuring range | –50...+150 °C |
Zero point offset | ± 10 °C |
Ambient temperature | Measuring transducer –30...+70 °C |
Medium |
clean air and non-aggressive, non-combustible gases |
Error detection | sensor breakage, sensor short circuit |
Bus protocol |
Modbus (RTU mode), address range 0...247 selectable |
Signal filtering | 0,3 s / 1 s / 10 s |
Protective tube (sensor sleeve) |
stainless steel, 1.4571, V4A, Ø = 6 mm, nominal length (NL) = 50 mm (other dimensions optional) cable entry stamped (optional rolled) |
Electrical connection | 0.2 - 1.5 mm2, via push-in terminal |
Enclosure |
plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted ⁄ Phillips head - combination), colour traffic white (similar to RAL 9016), enclosure cover for display is transparent ! |
Enclosure dimensions | 108 x 78.5 x 45.8 mm (Tyr 3 with display) |
Cable gland |
2x M 20 x 1.5; with strain relief, exchangeable, inner diameter 8 - 13 mm |
Connection cable |
silicone, SiHF, 2 x 0.25 mm², KL = 1.5 m (other lengths and range limits optional, e.g. PTFE leads up to +250 °C or glass fibre with steel wire mesh up to +350°C) |
Permissible air humidity | < 95 % r. H., non-precipitating air |
Protection class | III (according to EN 60 730) |
Protection type |
IP 65 (according to EN 60 529) humidity-tight stamped IP 68 (optional watertight compound-filled) rolled IP 54 (optional glass fibre cable) |
Standards |
CE conformity, electromagnetic compatibility according to EN 61326, according to EMC Directive 2014 ⁄ 30 ⁄ EU |
Optional |
Display with illumination, three-line, programmable, cutout approx. 51 x 29 mm (W x H), for displaying the actual temperature or an individually programmable display value (The Modbus interface allows the display to be individually configured in the 7-segment area and in the dot-matrix area.)
|
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
more
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
more
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...
more
ISH | 11. - 15.03.2019 | Stand 10.3 A71
more