Für jede Anwendung die richtige Lösung [Translate]
Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3 with Modbus connection, flexible, fully active sensor rod and plastic-coated copper protective tube (robust version), enclosure made from impact-resistant plastic with quick-locking screws.
The rod sensor is used for detecting average temperatures (mean values) in gaseous media, e.g. in ventilation and air conditioning ducts over the entire cross-section, or over a defined length. Laid along a meandering route, it uniformly detects the surrounding temperature as a duct sensor. The mean value sensors are factory-calibrated. Adjustment ⁄ fine adjustment by the user is possible (zero point offset is adjustable).
The MWTM is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M are available as optional accessories.
24 V AC (± 20 %) and
15…36 V DC
|Power consumption||< 1.5 VA ⁄ 24 V DC, < 3.5 VA ⁄ 24 V AC|
|Temperature deviation||typically ± 0.2 K at +25 °C|
|Sensor||Pt1000, DIN EN 60751, class B|
|Measuring range||– 50...+ 150 °C; Tmin –50 °C, Tmax + 80 °C|
|Zero point offset||± 10 °C|
|Ambient temperature||Measuring transducer –30...+70 °C|
clean air and
non-aggressive, non-combustible gases
|Error detection||sensor breakage, sensor short circuit|
Modbus (RTU mode),
address range 0...247 selectable
|Signal filtering||0,3 s / 1 s / 10 s|
by mounting flange, plastic
(galvanised steel optional, see accessories)
and mounting clamps MK - 05 - M
|Sleeve||stainless steel, 1.4571, V4A|
copper sensor tube, plastic-coated,
with spring for buckling protection
|Sensor and rod dimensions||
Ø = 5.0 mm,
nominal length NL = 3 m
(nominal length optional up to max. 20 m)
|Active length||active along the entire sensor length|
|Electrical connection||0.2 - 1.5 mm2, via push-in terminal|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016),
enclosure cover for display is transparent !
|Enclosure dimensions||108 x 78.5 x 45.8 mm (Tyr 3 with display)|
2x M 20 x 1.5; with strain relief, exchangeable,
inner diameter 8 - 13 mm
observe minimum bending radius of 35 mm and
permissible vibration load, ≤ ½ G
|Permissible air humidity||< 95 % r. H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
Display with illumination, three-line, programmable,
cutout approx. 51 x 29 mm (W x H),
for displaying the actual temperature or
an individually programmable display value (The Modbus
interface allows the display to be individually configured in the
7-segment area and in the dot-matrix area.)
|MF-06-K||Mounting flange, plastic||7100-0030-1000-000||5,16 €|
|MF-06-M||Metal mounting flange||7100-0030-5000-000||8,06 €|
|KRD-04||Capillary tube gland bracket||Capillary tube gland bracket for FST and MWTF/MWTM for installation in ducts / sheet metal walls||7100-0030-7000-000||7,52 €|
|MK-05-M||Mounting brackets, galvanised steel||Galvanised steel mounting brackets||7100-0034-0000-000||8,33 €|
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...