Für jede Anwendung die richtige Lösung [Translate]
Calibratable outside temperature measuring transducers THERMASGARD® ATM 2 - Modbus - T3 with Modbus connection, enclosure made from impact-resistant plastic with quick-locking screws, with ⁄ without optional display (for displaying actual temperature).
For the detection of outside temperatures, temperatures in wet rooms, e.g. for installation in outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation of the temperature transmitter in outside areas preferably at the north side of the building or in a protected place.
In cases of direct solar irradiation, we recommend the use of our WS 01 or WS 04 sun protection hood (accessory).
The outdoors sensors are factory-calibrated. Adjustment ⁄ fine adjustment by the user is possible (zero point offset is adjustable).
24 V AC (± 20 %) and
15…36 V DC
|Power consumption||< 2 W ⁄ 24 V DC, < 3.5 VA ⁄ 24 V AC|
|Temperature deviation||typically ± 0.2 K at +25 °C|
|Sensor||Pt1000, DIN EN 60751, class B|
|Measuring range||–50...+150 °C|
|Zero point offset||± 10 °C|
|Ambient temperature||Measuring transducer –30...+70 °C|
clean air and
non-aggressive, non-combustible gases
|Error detection||sensor breakage, sensor short circuit|
Modbus (RTU mode),
address range 0...247 selectable
|Signal filtering||0,3 s / 1 s / 10 s|
|Process connection||by screws|
|Electrical connection||0.2 - 1.5 mm2, via push-in terminal|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016),
enclosure cover for display is transparent !
|Enclosure dimensions||108 x 78.5 x 45.8 mm (Tyr 3 with display)|
2x M 20 x 1.5; with strain relief, exchangeable,
inner diameter 8 - 13 mm
|Permissible air humidity||< 95 % r. H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
Display with illumination, three-line, programmable,
cutout approx. 51 x 29 mm (W x H),
for displaying the actual temperature or
an individually programmable display value (The Modbus
interface allows the display to be individually configured in the
7-segment area and in the dot-matrix area.)
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...