Für jede Anwendung die richtige Lösung [Translate]
Calibratable tube contact temperature measuring transducers with strap THERMASGARD® ALTM1 - Modbus - T3 with Modbus connection, enclosure made from impact-resistant plastic with quick-locking screws, with ⁄ without optional display (for displaying actual temperature).
The surface contact sensor is used for temperature detection on piping, tubes (e.g. cold- and hot-water) or on heating sections for heating system control. The tube sensors are factory-calibrated. Adjustment ⁄ fine adjustment by the user is possible (zero point offset is adjustable).
24 V AC (± 20 %) and
15…36 V DC
|Power consumption||< 2 W ⁄ 24 V DC, < 3.5 VA ⁄ 24 V AC|
|Temperature deviation||typically ± 0.2 K at +25 °C|
|Sensor||Pt1000, DIN EN 60751, class B|
Tmax up to +100 °C
|Zero point offset||± 10 °C|
|Ambient temperature||Measuring transducer –30...+70 °C|
|Error detection||sensor breakage, sensor short circuit|
Modbus (RTU mode),
address range 0...247 selectable
|Signal filtering||0,3 s / 1 s / 10 s|
endless metal strap and metal tightener
(included in scope of delivery)
|Strap dimensions||Ø = 13 - 92 mm (¼ - 3"), L = 300 mm|
|Electrical connection||0.2 - 1.5 mm2, via push-in terminal|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016),
enclosure cover for display is transparent !
|Enclosure dimensions||108 x 78.5 x 45.8 mm (Tyr 3 with display)|
2x M 20 x 1.5; with strain relief, exchangeable,
inner diameter 8 - 13 mm
|Permissible air humidity||< 95 % r. H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
Display with illumination, three-line, programmable,
cutout approx. 51 x 29 mm (W x H),
for displaying the actual temperature or
an individually programmable display value (The Modbus
interface allows the display to be individually configured in the
7-segment area and in the dot-matrix area.)
|WLP-1||Heat-conductive paste||Silicone-free heat-conductive paste||7100-0060-1000-000||2,85 €|
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...