Für jede Anwendung die richtige Lösung [Translate]
Calibratable room temperature measuring transducer THERMASGARD® RTM1 Modbus With Modbus connection, with ⁄ without optional display for displaying the actual temperature, in an elegant enclosure made of plastic, with snap-on lid, base with 4-hole attachment, for installation on vertically or horizontally installed in-wall flush boxes, with predetermined breaking point for on-wall cable entry.
The calibratable room operating sensor measures the temperature of non-aggressive gases, particularly air. In this case, a setpoint potentiometer is available as an operating element. Optional devices with LCD displays for displaying readings are available for temperature/humidity/dew point or setpoint readings. The displays (LCD) and the retrieval of measurement and control values are triggered via the Modbus interface.
24 V AC (± 20 %) and
15…36 V DC
< 1,0 VA ⁄ 24 V DC
< 2,2 VA ⁄ 24 V AC
temperature, relative humidity, dew point,
|Deviation of humidity||
typical ± 2.0 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3.0 % r. H.
|Temperature deviation||typically ± 0.2 K at +25 °C|
digital humidity sensor
with integrated temperature sensor,
low hysteresis, high long-term stability
|Measuring range||0...+50 °C|
|Zero point offset||± 10 °C, adjustable by potentiometer|
storage –35...+85 °C;
operation 0...+50 °C
clean air and
non-aggressive, non-combustible gases
Modbus (RTU mode),
address range 0...247 selectable
|Signal filtering||4 s / 32 s|
|Process connection||by screws|
plastic, material ABS,
colour pure white (similar to RAL 9010)
|Dimensions||85 x 85 x 27 mm (Baldur 1)|
wall mounting or on in-wall flush box, Ø 55 mm,
base with 4 holes, for attachment to vertically or
horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry
from top ⁄ bottom in case of plain on-wall installation
|Permissible air humidity||< 95 % r. H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 30 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
Two-line display with illumination
, cutout 36 x 15 mm (W x H),
for displaying the ACTUAL temperature and the internal diagnostics
(sensor breakage, sensor short circuit)
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
SPS IPC Drives – S+S Regeltechnik will be there
26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 27 to 29 November 2018.
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...