Für jede Anwendung die richtige Lösung [Translate]
calibratable resistance thermometer with globe THERMASGARD® RPTM 2 - Modbus with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, with/ without optional display indicating the actual temperature.
The pendulum room sensor is specifically designed for temperature detection in larger rooms or halls, for example, as a dark radiation sensor. Due to the measuring method employed by this pendulum room temperature sensor in combination with its positioning in the room, an excellent measuring result that is representative of the room is achieved. The globe thermometer determines the effective portion of active radiation or the effective radiant heat at the measured location. The globe temperature is determined in order to take heat radiation into consideration and to estimate the degree of thermal comfort (operative room temperature). The operative room temperature describes the co-action of heat radiation and heat convection (the ratio of globe temperature/ air temperature is approx. 70 % to 30 %). The sensors are factory-calibrated. Adjustment/ fine adjustment by the user is possible (zero point offset is adjustable).
24 V AC (± 20 %) and
15…36 V DC
< 1,0 VA/ 24 V DC
< 2,2 VA/ 24 V AC
|Temperature deviation||typically ± 0.2 K at +25 °C|
|Sensor||Pt1000, DIN EN 60751, class B|
|Measuring range||– 50...+ 150 °C; Tmin –50 °C, Tmax + 80 °C|
|Zero point offset||± 10 °C|
|Ambient temperature||Measuring transducer –30...+70 °C|
clean air and
non-aggressive, non-combustible gases
|Error detection||sensor breakage, sensor short circuit|
Modbus (RTU mode),
address range 0...247 selectable
|Signal filtering||0,3 s / 1 s / 10 s|
|Globe||plastic, colour black, Ø = 50 mm|
PVC; LiYY, 1.5 m
(other lengths optional: e.g. 3 m, 6 m)
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016),
housing cover for display is transparent !
|Housing dimensions||72 x 64 x 43.3 mm (Tyr 1 with Display)|
2x M 12 x 1.5 (Y-adapter); with strain relief,
exchangeable, max. inner diameter 6 mm
PVC, H03VV-F, 2 x 0.5 mm2,
KL = approx. 1.5 m (other lengths optional)
|Permissible air humidity||< 95 % r. H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
two-line display with illumination, programmable,
cutout approx. 36 x 15 mm (W x H),
for displaying the actual temperature or
an individually programmable display value
(The Modbus interface allows the display to be individually
configured in the 7-segment area and in the dot-matrix area.)
|MODBUS-Y||Y-adapter||Y-adapter as bypass for bus connection||7000-0005-0002-100||8,88 €|
sps smart production solutions – S+S Regeltechnik will be there 26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 26 to 28 November 2018.
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...
PREMASGARD® 814x-Modbus - Multi-funtional duct sensor
This bus capable and calibratable pressure measuring transducer enables the control of differential...