Multi-funtional duct sensor
For humidity, temperature, pressure, differential pressure and volume flow for monitoring and controlling heating, ventilation and air-conditioning systemsPREMASGARD® 814x-Modbus
Für jede Anwendung die richtige Lösung [Translate]
RYMASKON® stands for a series of multifunctional room control units. The individually configurable RYMASKON® 200 - Modbus enables automated monitoring and control of the indoor climate and illumination in a Modbus network. It provides three digital inputs and a universal input, which allows connection of up to four external push buttons or switches. It can be configured remotely from a higher-level Modbus master and integrated into a cross-building room climate monitoring and data acquisition system. Internal sensors record room temperature, relative humidity and dew point.
Up to eight capacitive function buttons on the front panel of the compact unit can be used for on-site operation and configuration. A buzzer sounds to acknowledge button use and can also be used as an acoustic fault or alarm warning.
The dimmable multifunctional display is designed specifically for room operation and uses intuitive symbols for a clear view of all available spatial data. Besides the time, date and climate parameters (temperature, humidity, dew point, CO2 content), it can also display additional features, such as fan mode or room occupancy. The back light colour can be adapted to the room design.
|Voltage supply||24 V DC (± 10 %)|
|Power consumption||max. 0.8 W|
|Measuring range, humidity||0...100 % r.H., resolution: 0.1 % r.H.|
|Measuring range, temperature||–40...+125 °C, resolution: 0.1 °C|
3 digital inputs (for standard push buttons or switches)
1 universal input (can be configured for connecting
NTC temperature sensors or as additional digital input
for the connection of standard push buttons or switches)
RS485 Modbus RTU slave (57600, 38400, 19200, 9600 Baud),
bus termination can be set via DIP switch,
configurable speed 1200-115200 bit/s
(typically 57600 bit/s),
adjustable transfer mode
(typically "8E1", 1 start bit, 8 data bits, even parity, 1 stop bit)
1 backlit multifunctional display
(individually programmable RGB colour selection)
4 / 6 / 8 touch buttons, type-dependent
CMOS temperature sensor
±0.5 °C (at +5...+60 °C)Humidity:
±2 % r.H. (at +25 °C, 20...80 % r.H.)
±3 % r.H. (at +25 °C, 0...20 % r.H. or 80...100 % r.H.)
|Ambient temperature||0...+50 °C (operation)|
|Electrical connection||0.14 - 1.5 mm², via plug-in screw terminal|
|Housing||plastic, white colour|
|Dimensions||approx. 94.5 x 110 x 19.5 mm|
using a plastic mounting plate,
on in-wall flush box, Ø 55 mm
|Permissible air humidity||10...90 % r. H. (without dew formation)|
|Protection type||IP 30 (according to EN 60 529)|
CE conformity, electromagnetic compatibility
according to EN 50491, EMC directive 2014/ 30/ EU
1 NFC (Near Field Communication)
1 infra-red receiver (NEC protocol)
sps smart production solutions – S+S Regeltechnik will be there 26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 26 to...
THERMASGARD® TM65-Modbus -T3 - Calibratable immersion, screw-in or duct temperature measuring transducer
Patented high-quality product (patented immersion sensor, DE 10 2012 017 500.0) – basic device with...
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...