Efficient, convenient and network-enabled
Elegant appearance, touch-operated interface, large display, and Modbus-compatible
RYMaskon
RYMASKON® stands for a series of multifunctional room control units. The individually configurable RYMASKON® 200 - Modbus enables automated monitoring and control of the indoor climate and illumination in a Modbus network. It provides three digital inputs and a universal input, which allows connection of up to four external push buttons or switches. It can be configured remotely from a higher-level Modbus master and integrated into a cross-building room climate monitoring and data acquisition system. Internal sensors record room temperature, relative humidity and dew point.
Up to eight capacitive function buttons on the front panel of the compact unit can be used for on-site operation and configuration. A buzzer sounds to acknowledge button use and can also be used as an acoustic fault or alarm warning.
The dimmable multifunctional display is designed specifically for room operation and uses intuitive symbols for a clear view of all available spatial data. Besides the time, date and climate parameters (temperature, humidity, dew point, CO2 content), it can also display additional features, such as fan mode or room occupancy. The back light colour can be adapted to the room design.
Voltage supply | 24 V DC (± 10 %) |
---|---|
Power consumption | max. 0.8 W |
Measuring range, humidity | 0...100 % r.H., resolution: 0.1 % r.H. |
Measuring range, temperature | –40...+125 °C, resolution: 0.1 °C |
Inputs |
3 digital inputs (for standard push buttons or switches) 1 universal input (can be configured for connecting NTC temperature sensors or as additional digital input for the connection of standard push buttons or switches) |
Bus interface |
RS485 Modbus RTU slave (57600, 38400, 19200, 9600 Baud), bus termination can be set via DIP switch, configurable speed 1200-115200 bit/s (typically 57600 bit/s), adjustable transfer mode (typically "8E1", 1 start bit, 8 data bits, even parity, 1 stop bit) |
Operating elements |
1 backlit multifunctional display (individually programmable RGB colour selection) 4 / 6 / 8 touch buttons, type-dependent |
Sensor |
Temperature: CMOS temperature sensor Humidity: |
Accuracy |
Temperature: ±0.5 °C (at +5...+60 °C)Humidity: ±2 % r.H. (at +25 °C, 20...80 % r.H.) ±3 % r.H. (at +25 °C, 0...20 % r.H. or 80...100 % r.H.) |
Ambient temperature | 0...+50 °C (operation) |
Electrical connection | 0.14 - 1.5 mm², via plug-in screw terminal |
Enclosure | plastic, white colour |
Dimensions | approx. 94.5 x 110 x 19.5 mm |
Installation |
using a plastic mounting plate, on in-wall flush box, Ø 55 mm |
Permissible air humidity | 10...90 % r. H. (without dew formation) |
Protection type | IP 30 (according to EN 60 529) |
Standards |
CE conformity, electromagnetic compatibility according to EN 50491, EMC directive 2014 ⁄ 30 ⁄ EU |
Features |
1 NFC (Near Field Communication) 1 infra-red receiver (NEC protocol) 1 buzzer |
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
more
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
more
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...
more
ISH | 11. - 15.03.2019 | Stand 10.3 A71
more