Für jede Anwendung die richtige Lösung [Translate]
The maintenance-free microprocessor-controlled PREMASGARD® 232x - Modbus - T3 (series), with Modbus connection, impact-resistant plastic enclosure, enclosure cover with quick-locking screws, optionally with ⁄ without display, is used for detecting positive, negative, or differential pressure measurement in clean air.
The piezo-resistive measuring element is temperature-compensated and guarantees high reliability and accuracy. The pressure transmitters are provided with a push-button for manual zero point calibration and an adjustable offset. Applications of these pressure sensors are in cleanroom, medical and filter technology, at ventilation and air conditioning ducts, at spray booths, in largescale catering facilities, for filter monitoring and level measurement, or for triggering frequency converters. Media measured with these pressure transducers are air (non-precipitating), or other gaseous non-aggressive, non-combustible media.
The pressure sensor has a manual zero point pushbutton. Fine adjustment by the user is possible at any time. The delivery includes the connection set ASD-06 (2 m connection hose, two pressure connection nipples, screws).
24 V AC (± 20 %) and
15…36 V DC
|Power consumption||< 2 W ⁄ 24 V DC, < 3.5 VA ⁄ 24 V AC|
|Measuring range, pressure||– 7000...+ 7000 Pa|
|Media temperature||–20...+50 °C (temperature-compensated 0...+50 °C)|
4 ⁄ 6 x 11 mm (hoses Ø = 4 ⁄ 6 mm),
metal pressure connection nozzles
|Type of pressure||differential pressure|
(7000 Pa): typically ± 35 Pa at +25 °C
compared to the calibrated reference device
|Zero point offset||± 10 % of final value|
|Above- ⁄ below-pressure||max. ± 50 kPa|
clean air and
non-aggressive, non-combustible gases
|Electrical connection||0.2 - 1.5 mm2, via push-in terminal|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016),
enclosure cover for display is transparent !
|Enclosure dimensions||108 x 78.5 x 45.8 mm (Tyr 3 with display)|
2x M 20 x 1.5; with strain relief, exchangeable,
inner diameter 8 - 13 mm
|Long-term stability||± 1 % ⁄ year|
|Hysteresis||0.3 % of final value|
|Media contacting parts||Brass, Ni, Duroplast, Si, epoxy, RTV, BSG, UV silicone gel|
|Temperature drift values||± 0.1 % ⁄ °C|
|Linearity||< ± 1 % of final value|
|Permissible air humidity||< 95 % r. H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
two-line display with illumination, programmable,
cutout approx. 36 x 15 mm (W x H), to display ACTUAL pressure
or an individually programmable display value(The Modbus interface allows the display to beindividually configured in the 7-segment area andin the dot-matrix area.)
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...