Construction progress of the Giga factory for sensor technology
The structural work on the production halls and offices at our new location in Nuremberg, Germany is nearing completion. Construction is progressing according to plan, so we are well positioned for the future and the increasing demand for our sensors.
Watch the videoGroundbreaking ceremony for significant growth
The office and manufacturing space alone at the new S+S location in Nuremberg will be expanded to 8,600 m² in order to meet the increasing demand for advanced sensor devices.
Watch the videoWith Giga factory for sensors to become the #1 on the market
On a total area of over 14000 square meters, the new S+S company headquarters is being built in the north of Nuremberg.
Watch the videoProducts especially for industry
Industrial Design
Specialists in pressure
Multi-range measuring transducers for pressure, differential pressure and volume flow
PREMASGARD 211x / 212xEfficient, convenient and network-enabled
Elegant appearance, touch-operated interface, large display, and Modbus-compatible
RYMaskon
Multi-funtional duct sensor
For humidity, temperature, pressure, differential pressure and volume flow for monitoring and controlling heating, ventilation and air-conditioning systems
PREMASGARD® 814x-Modbus
One basic device in multiple versions
Calibratable immersion, screw-in or duct temperature measuring transducer
THERMASGARD® TM65-Modbus-T3
Electronic frost protection monitor
2-phase thermostat with continuous and switching output for reliable prevention of frost damages and freezing
THERMASREG® FS-20
Für jede Anwendung die richtige Lösung [Translate]
Quality product for HVAC sector, accuracy ± 2 %
calibratable dew point control switch HYGRASGARD® TW - Modbus incl. strap/ with detached sensor head, with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, with/ without optional display.
The universal surface-contact sensor is used to detect various parameters in humidity measurement. The relative humidity and temperature of the ambient air are measured. These measurands are used to calculate various parameters internally. The Modbus can be used to retrieve the following parameters: relative humidity [% r. H.], absolute humidity [g/ m³], mixture ratio [g/ kg], dew-point temperature [°C], enthalpy [kJ/ kg] (ignoring atmospheric air pressure) and ambient temperature [°C].
It is used in non-aggressive, dust-free environments, in the refrigeration, air conditioning and clean room technology, hotels, engineering rooms, meeting and conference facilities. The measuring transducers are designed for exact detection of temperature and humidity. A digital, long-term stable sensor is used as a measuring element for humidity and temperature measurement. Fine adjustment by
the user is possible. The sensor is suitable for ceiling and duct installation or for integration in equipment.
| Voltage supply |
24 V AC (± 20 %) and 15…36 V DC |
|---|---|
| Power consumption |
< 1,0 VA/ 24 V DC
< 2,2 VA/ 24 V AC |
| Deviation of humidity |
typical ± 2.0 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3.0 % r. H. |
| Temperature deviation | typically ± 0.2 K at +25 °C |
| Sensor |
digital humidity sensor
with integrated temperature sensor, low hysteresis, high long-term stability |
| Sensor protection | membrane filter |
| Measuring range |
0...100 % r.H. (humidity) – 35...+80 °C (temperature) |
| Zero point offset |
± 10 % r.H. (humidity) ± 5 °C (temperature) |
| Ambient temperature | –30...+70 °C |
| Medium |
clean air and non-aggressive, non-combustible gases |
| Bus protocol |
Modbus (RTU mode), address range 0...247 selectable |
| Signal filtering | 4 s / 32 s |
| Process connection |
endless metal strap with metal tightener, 300 mm, for pipes up to 3 '' (included in scope of delivery) |
| Housing |
plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted/ Phillips head - combination), colour traffic white (similar to RAL 9016), housing cover for display is transparent ! |
| Housing dimensions | 72 x 64 x 43.3 mm (Tyr 1 with Display) |
| Cable gland |
2x M 12 x 1.5 (Y-adapter); with strain relief, exchangeable, max. inner diameter 6 mm |
| Installation |
TW - Modbus with strap for direct mounting on pipes or for direct mounting on flat surfaces (e.g. walls, ceilings) |
| Permissible air humidity | < 95 % r. H., non-precipitating air |
| Protection class | III (according to EN 60 730) |
| Protection type | IP 65 (according to EN 60 529) |
| Standards |
CE conformity according to EMC Directive 2014/ 30/ EU, according to EN 61 326 |
| Display |
two-line display with illumination, programmable, cutout approx. 36 x 15 mm (W x H), for displaying the actual humidity and actual temperature or a selectable parameter or an individually programmable display value (The Modbus interface allows the display to be individually configured in the 7-segment area and in the dot-matrix area.) |
| MODBUS-Y |
Y-adapter for cable gland M16 x1.5 (on 2x M12 x1.5), plastic (included in the scope of delivery) |
| Type | Item No. | Price | ||
|---|---|---|---|---|
| KA2-Modbus | 1906-1200-0000-100 | 185,00 € |
Light + Building 2020 – S+S Regeltechnik will be there
27.09. - 02.10.2020
Hall 9.1 | Booth A84
Be our guest at the world's leading trade fair for light, design and intelligent...
more
THERMASGARD® TM65-Modbus -T3 - Calibratable immersion, screw-in or duct temperature measuring transducer
Patented high-quality product (patented immersion sensor, DE 10 2012 017 500.0) – basic device with...
more
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...
more
Light + Building 2020 | Frankfurt am Main | 27.09. - 02.10.2020
more
