Für jede Anwendung die richtige Lösung [Translate]
The motion and light sensor KINASGARD® / PHOTASGARD® RBWF ⁄ LF is a combined instrument and detects movements as well as the light intensity by means of a diffusor and the presence of persons. It is also used to recognise conditions. The RBWF ⁄ LF issues a standard signal of 0 - 10 V or 4...20 mA for light intensity, and has a switching (changeover contact) output for detecting motion.
The multisensor is used in building automation, in corridors, at workplaces, in industrial halls, in offices and business facilities for the control of lighting as needed, e.g. to control sunshade equipment, for daylight-dependent constant light control, for activating Venetian blinds or luminaires, for automatic energy conservation, and to avoid unnecessary heating-up or cooling of unoccupied rooms.
15...36 V DC
depending on working resistance, residual ripple stabilised ± 0.3 V
|Power consumption||< 1 W at 24 V DC; < 2 VA at 24 V AC|
|Working resistance||Ra (ohm) = (Ub -14 V) ⁄ 0.02 A for I variant|
|Output, light sensor||4...20 mA|
|Output, motion sensor||
without ⁄ with motion + presence,
potential-free changeover contact (24 V), 1 A ohmic load
|Sensor||infra-red motion sensor, light sensor with diffuser|
|After-running time||adjustable from 4 s to 16 min|
|Measuring range, light sensor||
multi-range switching (via DIP switches)
with 4 switchable measuring ranges
0...500 Lux ⁄ 1 kLux ⁄ 5 kLux ⁄ 20 kLux
(other individual ranges optional, e. g. 100 kLux)
|Deviation, light sensor||typically < 5 % of final value|
|Ambient temperature||0...+50 °C|
0.14 - 1.5 mm²
via terminal screws on circuit board
plastic, material ABS,
colour pure white (similar to RAL 9010)
|Dimensions||85 x 85 x 27 mm (Baldur 1)|
wall mounting or on in-wall flush box, Ø 55 mm,
base with 4 holes, for attachment to vertically or
horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry
from top ⁄ bottom in case of plain on-wall installation
|Protection class||III (according to EN 60 730)|
|Protection type||IP 30 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...