Für jede Anwendung die richtige Lösung [Translate]
The room sensor HYGRASGARD® FSFM ⁄ FSFTM in the in-wall enclosure is used for measuring the relative humidity and temperature of the air. It converts the measured values into a standard signal of 0 -10 V.
A digital, long-term stable sensor is used for humidity and temperature measurement. Relative humidity [% r.H.] is the quotient of water vapour partial pressure divided by the saturation vapour pressure at the respective gas temperature.
The in-wall sensor is mounted in high-quality panel switch programmes, ideally of the brands Gira, Berker, Merten, Jung, Siemens or Busch-Jaeger (using in-wall adapters) either individually or in combination with light switches, socket outlets, etc.
It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, and in interior rooms, such as living rooms, offices, hotels, etc
|Voltage supply||24 V AC ⁄ DC (± 10 %)|
|Power consumption||< 1.1 VA ⁄ 24 V DC ; < 2.2 VA ⁄ 24 V AC|
|Measuring range, humidity||0...100 % r. H.|
|Operating range, humidity||0...95 % r. H. (without dew formation)|
|Deviation of humidity||typically ± 3.0 % (20...80 % r. H.) at +25 °C, otherwise ± 5.0 %|
|Output, humidity||0 - 10 V|
|Measuring range, temperature||0...+50 °C|
|Temperature deviation||typically ± 0.8 K at +25 °C|
|Output, temperature||0 - 10 V|
digital humidity sensor
with integrated temperature sensor,
low hysteresis, high long-term stability
storage –35...+85 °C;
operation 0...+50 °C
clean air and
non-aggressive, non-combustible gases
|Electrical connection||0.14 - 1.5 mm², using plug terminals|
plastic, standard colour pure white, glossy (similar to RAL 9010)
(other colours are possible on request with colour variants
depending on the respective light switch programme)
|Installation||on in-wall flush box, Ø = 55 mm|
|Long-term stability||± 1 % ⁄ year|
|Permissible air humidity||max. 90 % r. H., non-precipitating air|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 20 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
GIRA System 55
(other switch programmes, manufacturers, colours
and prices upon request
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...