Für jede Anwendung die richtige Lösung [Translate]
Electronic hygrostat and humidity sensor HYGRASREG® AH - 40 with one switching output, adjustable switching threshold and display for indicating actual humidity (accuracy class ± 2.0 % r.H.) and for setting the target humidity.
They are used to control and monitor the relative humidity, e.g. in laboratories, production facilities, climatic test cabinets, indoor swimming pools, greenhouses, etc. to control humidifying and dehumidifying equipment. These measuring transducers are designed for exact detection of humidity. The AH - 40 uses a digital, long-term stable sensor as a measuring element for measuring humidity. It is used in dust-free, unpolluted, non-aggressive air.
24 V AC (± 20 %) and
15…36 V DC
|Power consumption||< 1.1 VA ⁄ 24 V DC ; < 2.2 VA ⁄ 24 V AC|
digital humidity sensor
small hysteresis, high long-term stability
|Deviation of humidity||typical ± 2 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3 % r. H.|
|Output||potential-free changeover contact (24 V), 1 A ohmic load|
plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable
(optional metal sinter filter, Ø 16 mm, L = 32 mm)
|Setting range||5...95 % r. H.|
storage –35...+85 °C;
operation – 30...+75 °C, non-precipitating
|Process connection||by screws|
|Protective tube||stainless steel, Ø 16 mm, NL = 55 mm|
|Electrical connection||0.14 - 1.5 mm² via terminal screws|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016),
enclosure cover for display is transparent !
|Enclosure dimensions||72 x 64 x 43.3 mm (Tyr 1 with Display)|
2x M 12 x 1.5 (Y-adapter); with strain relief,
exchangeable, max. inner diameter 6 mm
|Long-term stability||± 1 % ⁄ year|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529) enclosure only!|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
two-line display with illumination, cutout approx. 36 x15 mm (W x H),
for displaying actual humidit and for setting the target humidity
The 1st line of the display shows the relative humidity.
The 2nd line shows on the left side the information
regarding the switching status of the relay (as a circuit),
as well as the switching value readout in % r.H.
on the right side (adjustable using the set potentiometer).
○ Circuit, empty = relay in idle state
● Circuit, full = relay energised
The relay output is triggered (contact 13 -11 closed) if the humidity
LED short pulses =
LED long pulses =
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
10. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...