Construction progress of the Giga factory for sensor technology
The structural work on the production halls and offices at our new location in Nuremberg, Germany is nearing completion. Construction is progressing according to plan, so we are well positioned for the future and the increasing demand for our sensors.
Watch the videoGroundbreaking ceremony for significant growth
The office and manufacturing space alone at the new S+S location in Nuremberg will be expanded to 8,600 m² in order to meet the increasing demand for advanced sensor devices.
Watch the videoWith Giga factory for sensors to become the #1 on the market
On a total area of over 14000 square meters, the new S+S company headquarters is being built in the north of Nuremberg.
Watch the videoProducts especially for industry
Industrial Design
Specialists in pressure
Multi-range measuring transducers for pressure, differential pressure and volume flow
PREMASGARD 211x / 212xEfficient, convenient and network-enabled
Elegant appearance, touch-operated interface, large display, and Modbus-compatible
RYMaskon
Multi-funtional duct sensor
For humidity, temperature, pressure, differential pressure and volume flow for monitoring and controlling heating, ventilation and air-conditioning systems
PREMASGARD® 814x-Modbus
One basic device in multiple versions
Calibratable immersion, screw-in or duct temperature measuring transducer
THERMASGARD® TM65-Modbus-T3
Electronic frost protection monitor
2-phase thermostat with continuous and switching output for reliable prevention of frost damages and freezing
THERMASREG® FS-20
Für jede Anwendung die richtige Lösung [Translate]
Calibratable duct humidity-/ temperature sensor HYGRASGARD® KFF - SD/ KFTF - SD (± 2.0%), with plastic
sinter filter (optional metal sinter filter), housing made from impact-resistant plastic with snap-on lid.
It measures the relative humidity and/ or the temperature of the air and converts the measurands into a
standard signal of 0 - 10 V or 4...20 mA. It has four switchable temperature ranges and is applied in nonaggressive
dust-free atmospheres in refrigeration, air conditioning, ventilation and clean room technology.
These measuring transducers are designed for exact detection of humidity. A digital long-term stable sensor is
used as measuring element for humidity measurement. The sensor is factory-calibrated; an environmental
precision adjustment by an expert is possible.
| Voltage supply |
15...36 V DC depending on working resistance, residual ripple stabilised ± 0.3 V |
|---|---|
| Power consumption | < 1.1 VA/ 24 V DC ; < 2.2 VA/ 24 V AC |
| Working resistance | Ra (ohm) = (Ub -14 V)/ 0.02 A for I variant |
| Sensors |
digital humidity sensor
with integrated temperature sensor, low hysteresis, high long-term stability |
| Measuring range, humidity |
0...100 % r. H. (output corresponding to 4...20 mA) |
| Deviation of humidity | typical ± 2 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3 % |
| Output, humidity | 4...20 mA |
| Measuring range, temperature |
multi-range switching with 4 switchable measuring ranges –35...+35 °C; –35...+75 °C; 0...+50 °C; 0...+80 °C (output corresponding to 0 -10 V or 4...20 mA) |
| Sensor protection |
plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable (optional metal sinter filter, Ø 16 mm, L = 32 mm) |
| Process connection |
by mounting flange, plastic (included in the scope of delivery) |
| Protective tube |
PLEUROFORMTM, material polyamide (PA6), with torsion protection, Ø 20 mm, NL = 235 mm, vmax = 30 m/s (air) (on request, optional stainless steel V2A (1.4301), Ø 16 mm) |
| Electrical connection |
2-, 3- or 4-wire connection 0.14 -1.5 mm ² via terminal screws on circuit board |
| Cable connection |
cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or M12 connector according to DIN EN 61076-2-101 (optional on request) |
| Housing |
plastic, UV-stabilised, material polyamide, 30 % glass-globe-reinforced colour traffic white (similar to RAL 9016) ALTF 02 with snap-on lid, |
| Housing dimensions | 72 x 64 x 37.8 mm (Tyr 01) |
| Cable gland |
M 16 x 1.5, including strain relief, exchangeable, max. inner diameter 10.4 mm |
| Long-term stability | ± 1 %/ year |
| Permissible air humidity | < 95 % r. H., non-precipitating air |
| Protection class | III (according to EN 60 730) |
| Protection type |
IP 54 (according to EN 60 529) Housing tested, TÜV SÜD, Report No. 713160960A (Tyr 01) |
| Standards |
CE conformity, according to EMC directive 2014/ 30/ EU, according to EN 61326-1, according to EN 61326-2-3 |
Light + Building 2020 – S+S Regeltechnik will be there
27.09. - 02.10.2020
Hall 9.1 | Booth A84
Be our guest at the world's leading trade fair for light, design and intelligent...
more
THERMASGARD® TM65-Modbus -T3 - Calibratable immersion, screw-in or duct temperature measuring transducer
Patented high-quality product (patented immersion sensor, DE 10 2012 017 500.0) – basic device with...
more
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...
more
Light + Building 2020 | Frankfurt am Main | 27.09. - 02.10.2020
more
