Für jede Anwendung die richtige Lösung [Translate]
The condensation control switch HYGRASREG® KW is installed on cooling ceilings, on cooling or cold-water piping, or on cooled surfaces. It reliably detects formation of condensation by means of its humidity and temperature sensor (no conductivity measurement) and thanks to its patented measuring method, the pro-dynamic cross convention (Patent No. DE 10 2012 015 726.6), an exact measurement result. The condensation sensor is designed to prevent the formation of condensation.
Dew point temperature is that temperature at which air reaches the state of saturation and water vapour starts to condensate. The KW condensation control switch can be operated as a monitor on cooling ceilings or pipes so that the switching output is activated when dew builds up on the cooling ceilings of the property to be monitored and e.g. a heating system is started, or other actuators are initiated.
24 V AC (± 20 %) and
15…36 V DC
|Switchpoint||approx. 93 % r.H. (permanently set)|
|Power consumption||< 1.1 VA ⁄ 24 V DC ; < 2.2 VA ⁄ 24 V AC|
|Output signal||potential-free changeover contact (24 V), 1 A ohmic load|
endless metal strap with metal tightener,
300 mm, for pipes up to 3 ''
(included in scope of delivery)
|Electrical connection||0.14 - 1.5 mm² via terminal screws|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016)
|Enclosure dimensions||72 x 64 x 43.3 mm (Tyr 1 with Display)|
2x M 12 x 1.5 (Y-adapter); with strain relief,
exchangeable, max. inner diameter 6 mm
The mounting position should be selected
so that no condensate can enter the sensor system
in the event that condensation forms! KW
with strap for direct mounting on pipes or
for direct mounting on flat surfaces (e.g. walls, ceilings) KW - external
with detached sensor head
(cable length KL = 1.5 m) for mounting on pipes
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
The relay output is triggered (contact 13 -11 closed)
LED short pulses =
LED long pulses =
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
10. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...