Flow monitor RHEASREG® SW

Screwed socket

Pipe Ø DN

Product group: WG01

Mechanical RHEASREG® SW paddle flow monitor with switching output, in an impact resistant plastic housing, with stainless-steel paddle, for flow monitoring of liquid and gaseous, non-aggressive media in pipes of hydraulic systems from ¾'' and ½'' to 8'' diametre.

The flow sensor is used as a flow controller or low water alarm, e.g. for pumps in oil and cooling circuits, cooling systems, evaporators, compressors and heat exchangers with brass or stainless-steel bodies.

Available configurations

Artikelnummer	Bezeichung
1702-3011-0000-000	RHEASREG® SW-1E
1702-3012-0101-000	RHEASREG® SW-2E
1702-3013-0031-000	RHEASREG® SW-3E
1702-3014-0041-000	RHEASREG® SW-4E

Switching capacity

15 (8) A; 24…250 V ACat 24 V AC min. 150 mA

Contact

dust-proof micro switch
as single-pole potential-free changeover contact

Max. temperature of medium

0...120 °C

Electrical connection

0.14 - 1.5 mm² via terminal screws

Cable connection

cable gland, plastic (M 20 x 1.5; with strain relief,
exchangeable, inner diameter 8 - 13 mm) or
M12 connector according to DIN EN 61076-2-101
(optional on request)

Housing

plastic, UV-stabilised,
material polyamide, 30 % glass-globe-reinforced,
colour traffic white (similar to RAL 9016)

Base body

galvanised steel

Housing dimensions

108 x 70 x 73,5 mm (Thor 2)

Housing temperature

–40...+85 °C

Cable gland

M 20 x 1.5; including strain relief

Dimensions

108 x 70 x 73,5 mm (Thor 2)