Für jede Anwendung die richtige Lösung [Translate]
The maintenance-free microprocessor-controlled on-wall sensor AERASGARD® AFTM-CO2 - W with automatic calibration (can be deactivated via DIP switches) is used for detecting the overall room climate. It measures CO2 within a range of 0...2000 ppm or 0...5000 ppm, air quality (VOC) in one of three sensitivity levels that can be selected LOW MEDIUM (default) / HIGH, temperature within a range of –35...+80 °C as well as relative ambient humidity of 0...100 % r.H. The measured values are converted into standard signals of 0 -10 V or 4...20 mA (selectable via DIP switches). As an option, the measured values can be shown continuously in the illuminated display.
The relative humidity (% r.H.) quotient of water vapour partial pressure divided by the saturation vapour pressure at the respective gas temperature. A digital, long-term stable sensor used as measuring element for relative air humidity and temperature guarantees exact measurement results.
The CO2 content of the air is measured using an optical NDIR sensor (non-dispersive infra-red technology). The detection range of the sensors is calibrated for standard applications such as monitoring residential rooms and conference rooms. Room ventilation on an as-needed basis, improved well-being and customer benefit, increased comfort as well as reduced operating costs through energy conservation are just some of the benefits of employing the AERASGARD® CO2 sensor.
The explanations above demonstrate that there are applications for CO2 measurements, for VOC measurem ents, but from our perspective, above all, for a combination of both measurands. The crucial factor in this respect is that both of these measurands are not convertible into each other and derivations to or from one another cannot be made. An NDIR CO2 measuring instrument measures selectively and cannot detect any VOC; a VOC mixed gas sensor cannot recognize CO2 molecules.
|Voltage supply||24 V AC/ DC (± 10 %)|
|Power consumption||< 4.8 W/ 24 V DC typical; < 6.8 VA/ 24 V AC typical; peak current 200 mA|
digital humidity sensor
with integrated temperature sensor,
low hysteresis, high long-term stability
|Measuring range, humidity||0...100 % r. H.|
|Operating range, humidity||0...95 % r. H. (without dew formation)|
|Deviation of humidity||typical ± 2 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3 %|
|Output, humidity||0 -10 V or 4...20 mA (selectable via DIP switches)|
|Measuring range, temperature||–35...+80 °C (output equivalent to 0 -10 V or 4...20 mA)|
|Operating range, temperature||–10...+60 °C|
|Temperature deviation||typically ± 0.2 K at +25 °C|
|Output, temperature||0 -10 V or 4...20 mA (selectable via DIP switches)|
|Measuring range, CO2||
multi-range switching (selectable via DIP switches)
0...2000 ppm; 0...5000 ppm
Optical NDIR sensor (non-dispersive infra-red technology),
with manual calibration (via zero button),
with automatic calibration (can be deactivated via DIP switches)
|Output, CO2||0 -10 V or 4...20 mA (selectable via DIP switches)|
|Measuring accuracy, CO2||typically ± 30 ppm ± 3 % of measured value|
|Temperature dependence, CO2||
± 5 ppm/ °C or ± 0.5 % of measured value/ °C
(whichever is higher)
|Pressure dependence||± 0,13 %/ mm Hg|
|Gas exchange||by diffusion|
with potential-free changeover contact (24 V / 1 A)
(assignment selectable via DIP switches, switchpoint adjustable)
|Response time||< 2 minutes|
0 -10 V or 4...20 mA, working resistance < 800 Ω
(selectable via DIP switches, selected variant applies for all outputs),
with offset potentiometer (± 10 % of the measuring range)
plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable
(optional metal sinter filter, Ø 16 mm, L = 32 mm)
|Ambient temperature||–10...+60 °C|
|Process connection||by screws|
|Protective tube||stainless steel V2A (1.4301), Ø 16 mm, NL = 55 mm|
|Electrical connection||0.14 - 1.5 mm² via terminal screws|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016),
housing cover for display is transparent !
|Housing dimensions||126 x 90 x 50 mm (Tyr 2)|
M 16 x 1.5; including strain relief,
|Long-term stability||< 2 % in 15 years|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
three-line display with illumination, cutout approx. 70 x 40 mm (W x H),
for displaying actual humidity, actual temperature, air quality and / or the actual CO2 content
sps smart production solutions – S+S Regeltechnik will be there 26. - 28.11.2019
Be our guest at Europe's leading trade fair for electric automation from 26 to 28 November 2018.
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...
PREMASGARD® 814x-Modbus - Multi-funtional duct sensor
This bus capable and calibratable pressure measuring transducer enables the control of differential...