Für jede Anwendung die richtige Lösung [Translate]
The maintenance-free, microprocessor-controlled on-wall sensor AERASGARD® ATM - CO2 - SD with automatic calibration (fixed) is used for detecting the CO2 content of the air within a range of 0...2000 ppm or 0...5000 ppm as well as the temperature within a range of –35...+80 °C. The measured values are converted into standard signals of 0 -10 V.
The relative humidity (% r.H.) quotient of water vapour partial pressure divided by the saturation vapour pressure at the respective gas temperature. A digital, long-term stable sensor used as measuring element for relative air humidity and temperature guarantees exact measurement results. The CO2 content of the air is measured using an optical NDIR sensor (non-dispersive infra-red technology). The detection range of the sensors is calibrated for standard applications such as monitoring residential rooms and conference rooms. Room ventilation on an as-needed basis, improved well-being and customer benefit, increased comfort as well as reduced operating costs through energy conservation are just some of the benefits of employing the AERASGARD® CO2 sensor. The explanations above demonstrate that there are applications for CO2 measurements, for VOC measurem ents, but from our perspective, above all, for a combination of both measurands. The crucial factor in this respect is that both of these measurands are not convertible into each other and derivations to or from one another cannot be made. An NDIR CO2 measuring instrument measures selectively and cannot detect any VOC; a VOC mixed gas sensor cannot recognize CO2 molecules.
|Voltage supply||24 V AC ⁄ DC (± 10 %)|
|Power consumption||< 4.8 W ⁄ 24 V DC typical; < 6.8 VA ⁄ 24 V AC typical; peak current 200 mA|
|Measuring range, temperature||–35...+80 °C (output equivalent to 0 -10 V or 4...20 mA)|
|Operating range, temperature||–10...+60 °C|
|Temperature deviation||typically ± 0.2 K at +25 °C|
|Output, temperature||0 -10 V (fixed)|
|Measuring range, CO2||
multi-range switching (selectable via DIP switches)
0...2000 ppm; 0...5000 ppm
optical NDIR sensor
(non-dispersive infra-red technology),
with manual calibration (via zero button) and
automatic calibration (fixed)
|Output, CO2||0 -10 V (fixed)|
|Measuring accuracy, CO2||typically ± 30 ppm ± 3 % of measured value|
|Temperature dependence, CO2||
± 5 ppm ⁄ °C or ± 0.5 % of measured value ⁄ °C
(whichever is higher)
|Pressure dependence||± 0,13 % ⁄ mm Hg|
|Gas exchange||by diffusion|
|Relay output||without changeover contact|
|Response time||< 2 minutes|
|Output||0 -10 V (fixed)|
|Ambient temperature||–10...+60 °C|
|Process connection||by screws|
|Protective tube||stainless steel V2A (1.4301), Ø 16 mm, NL = 55 mm|
|Electrical connection||0.14 - 1.5 mm² via terminal screws|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016)
|Enclosure dimensions||126 x 90 x 50 mm (Tyr 2)|
M 16 x 1.5; including strain relief,
|Long-term stability||< 2 % in 15 years|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...